Troubleshooting When Using 3D Mode - LG D2792P-SN.AHK Owner's Manual

24
TROUBLESHOOTING
TROUBLESHOOTING WHEN USING 3D MODE
I can see a swirling oil-like pattern on the monitor when the monitor is turned off.
y This is caused by the interference of external light in the air layer between the LCD surface and 3D filter.
The pattern becomes almost invisible when you turn on the power again.
I cannot see 3D image properly
If you are not using the glasses
provided with the monitor,
If you view 3D images outside the
optimal viewing angle or distance,
If you have not set the resolution,
If the images that your left and right
eyes see are reversed,
I cannot see 3D but only 2D images.
y This monitor works both in 2D and 3D mode. You can view a video in 3D if it is made in 3D. If you try
to view 2D images in 3D, they might not be displayed properly or you may experience poor picture
quality.
y When you view 3D images with this monitor, it is very important
that you use the glasses provided with the monitor. The glasses are
designed to compensate optically for the 3D filter attached to the
surface of the monitor. If you wear third-party glasses, you may not
see 3D images properly on the monitor.
y The optimal viewing angle of the monitor is 12° in vertical direction
while 130° in horizontal direction; the monitor 3D viewing range is
between 55 cm to 400 cm from the monitor.

When you view 3D images outside the optimal viewing angle or the
monitor 3D viewing range, the images may look overlapped or not
be displayed properly in 3D.
y Please set the resolution of the monitor to the maximum (1920 x
1080 @ 60 Hz) in the display settings. The 3D software may not
work properly if the resolution is not set to the maximum.
y The stripe images in the odd-numbered lines are the ones that your
right eye sees on the monitor. If you only see the stripe images, not
3D images, set the images for your right eye to be displayed in the
odd-numbered lines by changing the player or viewer option of the
3D software.