LG 37LD320H Owner's Manual page 136

Installer Menu Items 035 through 118
Menu Item Function
035 COMPPORT EN.
038 YPrPb EN.
039 REAR AUX EN
040 AUTO CAMPORT
046 STRT AUX SRCE
047 AUX STATUS
053 DIS. CH-TIME
069 EN. CH-T COL.
070 FOR. CH-TIME
071 BCK. CH-TIME
073 CH NOT AVBLE
075 REVERT CH
078 UPN MSB
079 UPN MSB-1
080 UPN MSB-2
081 UPN LSB
082 CHKSM ERROR
083 HANDSHK TIME
084 PERMANENT BLK
087 REAR RGB EN.
088 EN NOISE MUTE
090 KEY LOCK
091 YPrPB2 EN
093 RJP AVAILABLE
094 SAP MENU EN
096 DEF. ASP. RATIO
099 BACK LIGHTING
102 ATSC BAND
103 ATSC TUNE MODE
104 START MINOR CH
106 ASP RATIO LOCK
116 VIDEO MUTE EN
117 FACT DEFAULT
118 POWER SAVING
Note 1: Dependent on item 093 RJP Available setting.
206-4118
Value Range Default Value
0 / 1 1
0 / 1 1
0 / 1 1
0 / 1 1 Set to 1 to automatically switch to Camport. If set to 1, STRT AUX SRCE cannot be set to 2.
1 ~ 6, 255 6
0 / 1 0
0 / 1 0
0 / 1 1
0 ~ 7 2
0 ~ 7 2
0 / 1 0
0 / 1 0
0 ~ 255 0
0 ~ 255 0
0 ~ 255 0
0 ~ 255 0
0 / 1 1
0 ~ 5 5
0 / 1 0
0 / 2 / 18 2
0 / 1 1
0 / 1 0
0 / 1 1
0 1 2 5 6 0
0 / 1 1 Set to 0 to disable feature on Function menu. Set to 1 to enable feature on Function menu.
0 ~ 4 2
1 ~ 100 200
101 ~ 200, 255
0 ~ 4 4
0 / 1 1
0 ~ 255 0
0 / 1 0 To retain set aspect ratio on power cycle, set to 1. Set to 0 for default ratio on power cycle.
0 / 1 0
0 / 1 0
1, 3, 7 3 Set to 1 to be powered at b-Lan module. Set to 3 to bo powered at b-Lan module only when TV is powered
Brief Description of Function and Comments
Set to 0 to disable HDMI 1. Set to 1 enable HDMI 1
Set to 1 to enable display panel Component Video 1 input jacks.
Set to 1 to enable display panel Video 1 input jack.
Sets the starting AUX source.
Set to 1 for M.P.I. AUX source to be reported as a channel number instead of Channel 0.
Set to 1 to disable Channel-Time display.
Set to 1 to enable custom color for the Channel-Time display.
Chooses custom foreground color for the Channel-Time display.
Chooses custom background color for the Channel-Time display.
If set to 1 and channel override is 0, "NOT AVAILABLE" message is displayed
when directly accessing a channel not in the favorite channel list.
If set to 1 and loss of M.P.I. communication occurs, TV tunes to Start Channel.
User programmable number, most significant byte.
User programmable number, most significant byte - 1.
User programmable number, most significant byte - 2.
User programmable number, least significant byte.
Enforces rigid M.P.I. checksum.
Relaxes M.P.I. timing to be compatible with PC based Windows-controlled systems.
Removes block hours setting for Parental Control and makes block permanent.
Set to 0 to disable RGB1. Set to 2 to enable for PC and Auto Configure always enabled. Set to 18 to
enable for PC and Auto Configure one time only after AC ON.
If set to 1, mutes audio if no signal is present.
If set to 1, keyboard is locked out, IR is still functional.
Set to 1 to enable HDMI-2 input.
Set to 0 to disable. Set to 1, 2, 5 or 6 for HDMI or DVI mode. (See detailed descriptions.)
Sets default aspect ratio at power up. See detailed descriptions and item 106.
Sets the brilliance of the TV picture backlighting.
Settings above 101 control dynamic back lighting and disable power saving mode..
Selects ATSC band.
Default 01 for physical channel scan. Set to 0 for Virtual Channel scan.
Selects Minor start channel. Set 0 for NTSC. Not 0, sets Minor channel number.
Set to 0 for normal, set to 1 for Blank.
0=Normal. 1=Loads presets of all above settings.
n. Set to 7 to be not powered at b-Lan module.
(Except 32LH240H)
Installer Menu
P A G E 2 7