KKT KOLBE SET865IND User Manual page 45

Installation
• Contact a specialist or the building control authority if you are not sure
about the installation.
• Use heat resistant and easy to clean surfaces (e.g., ceramic tiles) as wall
surfaces around the cooking area.
Fixing the brackets
The unit should be placed on a stable, smooth surface (use the packaging).
Do not apply force onto the controls protruding from the hob.
Fix the hob on the work surface by screwing four brackets on the bottom
of the hob (see picture).
Adjust the bracket position to suit for different work surface's thickness.
Cautions
• The ceramic glass hob must be installed by qualified personnel or tech-
nicians. We have professionals at your service. Please never conduct the
operation by yourself.
• The ceramic glass hob shall not be mounted to cooling equipment, dish-
washers and rotary dryers.
• The ceramic glass hob shall be installed such that better heat radiation
can be ensured to enhance its reliability.
• The wall and heating zone above the counter top should be heat resis-
tant. Use heat resistant adhesive.
A Screw
B Retaining bracket
C Screw hole
D Bottom base
!
45