Customcool - GE 23 Series Owner's Manual And Installation Instructions

About CustomCool
ExpressThaw ™
ExpressChill ™
.
™
How it Works
The CustomCool ™
feature is a system of
dampers, a fan, a temperature thermistor
and a heater. Depending on the function
selected, a combination of these will be
used to quickly chill items, thaw items or
hold the pan at a specific temperature.
How to Use
Empty the pan. Place the Chill/Thaw
tray in the pan with the metal plate
facing down to chill and store items, or
with the metal plate facing up to thaw
items. Place the items on the tray and
close the pan completely.
Select the ExpressThaw,
or SelectTemp ™
pad. The display and
SET light will come on. Tap the pad
until the light appears next to the
desired setting. Use the chart to
determine the best setting to use.
To stop a feature before it is
finished, tap that feature's pad
until no options are selected and
the display is off.
During ExpressThaw
ExpressChill, ™ the display on the
controls will count down the time
in the cycle.
The pan is tightly sealed to prevent the pan's
temperature from causing temperature
fluctuations in the rest of the refrigerator.
The controls for this pan are located at the
top of the refrigerator with the temperature
controls.
After the ExpressThaw
complete, the pan will reset to the
MEAT setting (31°F) to help preserve
thawed items until they are used.
The displayed actual temperature of
the CustomCool pan may vary slightly
from the SET temperature based on
™ ExpressChill ™
usage and operating environment.
NOTE: For food safety reasons, it is
recommended that foods be wrapped
in plastic wrap when using ExpressThaw.
This will help contain meat juices and
improve thawing performance.
™
and
GEAppliances.com
™
cycle is
™
7