Daily Use - Haier HDW15V2 2 Series User Manual

Please note that not all sales models comes with identical features and
options. So pictures of that chapter are sometimes different to your dish-
washer model. Explanations try only to point out basic model variants.
1.
Load the baskets.
2.
Press the ON/OFF button
If the rinse aid indicator is on, fill the rinse aid dispenser and
reset
THE RINSE AID IDNICATOR.
3. Add the detergent; refer to section DETERGENT.
4.
Close the door.
5.
Set the programme according to the type of load and how dirty the
dishes, cups and cutlery are.
6. Maybe select a start delay time.
7.
Press the START / PAUSE button
8.
After programme end the appliance change to auto off. Unload the
baskets.
How to Reset Rinse Aid Indicator
The appliance is switched on.
The rinse aid indicator is on:
1.
Always completely fill the rinse aid before starting the next wash
cycle.
2. Press and hold the START/PAUSE button
indicators
the rinse aid indicator; refer to section HOW TO RESET
light up. The Status Indicators light up.
to activate the appliance.
to start the programme.

Daily Use

until the Rinse Aid
12