Moving The Tank - Buderus Logano G234X-64 Installation And Service Instructions Manual

3

Moving the tank

3 Moving the tank
This section details how to move the boiler safely.
NOTICE: Risk of system damage from impact shocks!
Fragile components could be damaged.
▶ Observe the transport instructions on the packaging.
NOTICE: System damage due to improper transport!
▶ Protect sheet metal parts, flue gas pipe, burner, and
control unit during transport.
▶ Do not use these components to lift the boiler.
Dispose of the packaging material in an environmentally
prudent fashion.
Moving the boiler with boiler cart
WARNING: Risk of injury if load is inadequately secured
during transportation.
▶ Use suitable means of transportation, e.g. a trolley
with strap.
▶ When transporting, secure the boiler to prevent it
from falling.
▶ Position transport equipment (e. g. hand truck) at the back of the
boiler.
▶ Secure packaged boiler to the hand truck.
▶ Move the packaged boiler to the installation location.
Fig. 4 Moving boiler with hand truck
▶ Remove the straps and the cardboard packaging.
▶ Loosen the retaining screws.
▶ Lift the boiler at the sides and slide to the edge of the pallet.
8
Transporting the boiler on pipes
▶ Place a pipe under the boiler and roll it on additional pipes to the
installation location ( Fig. 5).
▶ Place the boiler in its final position.
Fig. 5 Transporting the boiler on rollers
Logano G234X – 6 720 811 233 (2017/02)
6 720 806 028-03.1T