Appendix; Replacing The Battery; Enabling The Internal Heater - Panasonic FZ-E1 Series Operating Instructions Manual

Tablet computer

Hide thumbs Also See for FZ-E1 Series:

Table of Contents

Appendix

Place the unit on a flat, stable surface such as a table when replacing

the battery.

1. Turn off the unit (page 42).

2. Remove the battery cover (page 35).

3. Lift the battery by pulling on the yellow tab, and then remove the

battery.

4. Install the replacement battery (page 40).

5. Attach the battery cover (page 36).

Hot swapping the battery

The unit supports "hot swap" battery replacement, which allows you

to replace the unit's battery without turning the unit off.

• Be sure to finish the battery replacement in 30 seconds.

Otherwise, the unit may turn off. In this case, any data which has

not been saved will be lost.

If enabled, the unit's internal heater will activate in order to warm the

product when its temperature is -12 °C (10.4 °F) or colder.

1. Flick the Start screen to the left, and then in the App list, tap

[Settings] → [other settings].

2. Set the [Heater] switch to [Auto] or [Off].

Appendix

Table of Contents

Fz-e1