Installing An Sd Card - Panasonic FZ-E1 Series Operating Instructions Manual

Note
• See the Reference Manual (flick the Start screen to the left,
and then tap [Online Manual] in the App list) for information
on selecting the active SIM card slot and the preferred mobile
network mode.

Installing an SD card

Installing an SD card
1. Remove the battery cover (page 35) and battery if necessary.
• To remove the battery, lift the battery by pulling on the yellow
tab and then remove the battery.
2. Open the card access cover.
3. Insert the SD card into the SD card slot.
• Install only microSD cards. Do not attempt to install SD cards of
other sizes.
• Hold the SD card so that the terminal surface is facing down,
with the notch in the position circled here.
4. Push the SD card fully into the slot until you hear a click.
• When removing an SD card, push it slightly into the unit to eject
it.
Getting Started 39