Set The Ring Delay; Remote Access - Philips Linea M315 Extended User Documentation

Hide thumbs Also See for Linea M315:
Table of Contents

Advertisement

Listen to the incoming message
You can listen to the incoming messages in the
sequence they are recorded.
If there are new messages, press
to listen. If there is no new message, press
/
, then MENU/OK to listen to old
messages.
Press MENU/OK > [Answ. Machine] >
[Play], then press MENU/OK to confirm.
» New messages start playing. Old
messages start playing if there is no
new message.
Press REDIAL/C to stop listening.
Press MENU/OK to enter the options
menu.
Press
/
to increase/decrease the
volume.
Delete an incoming message
1
When you listen to the message, press
MENU/OK to enter the options menu.
2
Select [Delete], then press MENU/OK to
confirm.
» The current message is deleted.
Delete all old incoming messages
1
or MENU/OK > [Answ.
Press
/
Machine].
2
Select [Delete all], then press MENU/OK
to confirm.
» A confirmation request is displayed on
the handset.
3
Press MENU/OK to confirm.
» All old messages are permanently
deleted.
Note
You can only delete the read messages. No deleted
messages can be recovered.

Set the ring delay

You can set the number of times the phone
rings before the answering machine picks up
/
the call.
1
Press
Machine].
2
Select [Ring delay], then press MENU/OK
to confirm.
3
Select a new setting, then press MENU/
OK to confirm.
» The setting is saved.
Make sure that the answering machine is switched on
before this feature can be applied.
When you access the answering machine remotely,
you are recommended to set the ring delay to [Toll
saver] mode. This is a cost effective way to manage
your messages. When there are new messages, the
answering machine picks up the call after 3 rings; When
there is no messages, it picks up the call after 5 rings.

Remote access

You can operate your answering machine when
you are away from home. Simply make a call to
your phone with a touch tone phone and enter
your 4-digit PIN code.
The remote access PIN code is the same as your
system PIN. The preset PIN is 0000.
Activate/deactivate the remote access
You can allow or block remote access to the
answering machine.
or MENU/OK > [Answ.
/
Note
Tip
Note
EN
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Linea m310Linea m3151sbLinea m310r

Table of Contents