Change Flash Time; Change The Dial Mode; Set First Ring - Philips CD 150 User Manual

m
1
Press key in idle mode, scroll
:
to ADVANCED SET and press
< :
OK , scroll to AUTO PREFIX
<
and press OK .
2
is displayed on the
DETECT DIGIT
<
screen. Press to enter.
OK
• The last stored detect string is
displayed (if any).
3
Enter a detect string number
(maximum 5 digits) and press
to confirm.
• A validation tone is emitted and the
screen returns to previous menu.
:
4
Press to scroll to
PREFIX
<
to enter.
OK
• The last stored prefix number is
displayed (if any).
5
Enter the prefix number (maximum
<
10 digits) and press to
OK
confirm.
• A validation tone is emitted and the
screen returns to previous menu.
Note
If no detect string (blank) is entered, the
prefix number will be automatically added
r
to the predial number after key is
pressed.
For numbers starting with *, # or P, the
prefix number will not be added to the
r
predial number after key is pressed.
9.7

Change flash time

Flash time (or dial delay) is the time delay
by which the line will be disconnected
r
after you press key. It can be set to
short, medium or long.
The default value of flash time that is preset
in your handset should be the best suited
for your country network and therefore
Advanced settings
you should not need to change it.
m
1
Press key in idle mode, scroll
:
to
ADVANCED SET
< :
OK , scroll
<
and press .
OK
:
2
Scroll to
SHORT
<
and press
LONG
• A validation tone is emitted and the
screen returns to previous menu.
<
OK
9.8

Change the dial mode

The default value for dial mode that is
preset in your handset should be the best
suited for your country network and
. Press
therefore you should not need to change it.
There are two dial modes: Tone or Pulse.
m
1
Press key in idle mode, scroll
:
to
ADVANCED SET
< :
, scroll
OK
<
and press .
OK
:
2
Scroll to
TONE
<
press OK to confirm.
• A validation tone is emitted and the
screen returns to previous menu.
9.9

Set first ring

When this function is set to Off, the first
ring from a voice call will not sound. This is
particularly useful in countries where calling
line identity is sent after the first ring.
Consequently, the phones in the house will
not ring when a message arrives.
m
1
Press in idle mode, scroll
to
ADVANCED SET
<
, scroll to
OK FIRST RING
<
press .
OK
:
2
Scroll to
ON
<
to confirm.
OK
• A validation tone is emitted and the
screen returns to previous menu.
and press
to FLASH TIME
, or
MEDIUM
to confirm.
OK
and press
to
DIAL MODE
or and
PULSE
:
and press
and
or and press
OFF
33