Table of Contents
Advertisement
CORRECT UPPER NEEDLE SEAL INSTALLATION
Illustration
of correct seal
installation
NOTE: This seal is not meant to be removed or reinstalled however if seal was
removed for any reason please reinstall correctly with small diameter towards the
lid and flat area towards the K-cup. Wrong installation will cause leaks.
Lower needle is not of tubular construction and
does not go all the way through. It has U-shaped
configuration with slot on its side. It has sealed
end. Coffee runs out of the coffee capsule through
the slot in the needle and then into the inside of
the coffee capsule using same slot.
If upper, inlet nozzle get blocked use paper clip to
clean. Needle has 3 openings around the central
spike. Check if the silicone seal on the upper
A
piercing needle is properly installed.
24
Small
diameter
Flat area
Advertisement
Table of Contents
