Table of Contents
Advertisement
DISPENSING COFFEE
Operating Instructions:
1. Make sure you have turned on RED hot water switch at the back. See No. 15 on page 9.
2.
PRE-
INFU-
HEAT/
SION
READY
Touch "PRE-HEAT" button. If "READY"
light is not ON.
3.
PRE-
INFU-
HEAT/
SION
READY
4.
PRE-
INFU-
HEAT/
SION
READY
c. If Brewer was switched off, wait up to 10 minutes until the Ready light is
ON. If "READY" light is flashing, it indicates there is not enough water in
storage tank. Wait until water is pumped up. Check if bottle has water.
5.
PRE-
INFU-
HEAT/
SION
READY
By default 8 oz, middle cup is pre selected
for you. If you wish to have different size cup,
touch your choice of 4, 6, 8, 10and 12 oz.
START
DO NOT OPEN LID when "
Ready light will go on only when hot water tempera-
ture is 201°F. Water temperature goes down to 176°F
if Brewer was not used for 8 hours. Ready light might
keep on flashing if water level is low. Please check the
START
bottle.
a. Open lid and place a COFFEE
CAPSULE when "
flashing.
b. Press coffee capsule down by
your hand to pierce bottom of the
START
capsule.
6.
START
11
PRE-
INFU-
HEAT/
SION
READY
" LED is
Place a coffee cup on top
of brewers drip tray.
START
" RED light is on.
Advertisement
Table of Contents
