Specifications - Chamberlain LA500 Installation Manual

Vehicular swing gate operator
Hide thumbs Also See for LA500:
Table of Contents

Advertisement

SPECIFICATIONS

This model is intended for use in vehicular swing gate applications:
Usage Classification
Main AC Supply
System Operating Voltage
Accessory Power
Solar Power Max
Maximum Gate Weight/Length
90 Degree Travel Time*
Maximum Travel Range*
Maximum Daily Cycle Rate
Maximum Duty Cycle
Operating Temperature
Expansion Board
Inherent Entrapment Protection (Type A)
External Entrapment Protection (Type B1 and/or Type B2) 3 inputs per board - any combination of up to 3 photoelectric sensors and up to 2
*Travel time and range are affected by A and B mounting dimensions
4-3/16" (10.6 cm)
5-13/16" (14.8 cm)
40-3/8" (102.6 cm)
INTRODUCTION
Class I, II, III, & IV
120 Vac, 2 Amps (8 Amps including Accessory Outlets)
OR
240 Vac, 1 Amp
24 Vdc Transformer Run / Battery Backup
24 Vdc, 500mA max. for ON + SW (switched)
24 Vdc at 60 watts max.
1600 lbs. (725.7kg) / 8 ft (2.4 m)
800 lbs. (362.9 kg) / 16 ft (4.9 m)
600 lbs. (272.2 kg) / 18 ft (5.5 m)
15-18 seconds
115 degrees
300 cycles / day
Continuous
-40°C to 60°C (-40°F to 140°F)
Provided
Dual - RPM and Current Sense
edge sensors
Standard Control Box
16-7/16"
(41.8 cm)
14-3/8"
(36.5 cm)
6
Large Metal Control Box
20-3/4"
(52.7 cm)
6-9/16"
(16.7 cm)
17-3/16"
(43.7 cm)
6-3/16"
(15.7 cm)

Advertisement

Table of Contents
loading

Table of Contents