Table of Contents
Advertisement
•
Refer to
P126
for the [MOTION PICTURE] Mode menu.
•
The flash setting is fixed to [Œ].
•
Refer to
P206
for information about the available recording time.
•
The available recording time displayed on the screen may not decrease regularly.
•
Depending on the type of the card, the card access indication may appear for a while after
recording motion pictures. This is not a malfunction.
•
The screen may be blacked out momentarily, or the unit may record noise due to static
electricity or electromagnetic waves etc. depending on the environment of the motion picture
recording.
•
When recording a motion picture, the screen may go dark after a certain period to reduce
battery consumption, but this will not affect the recorded motion picture.
•
When operating the zoom in recording motion pictures, it may take time to come into focus.
•
The operational sound of the zoom or button operation may be recorded when it is operated
during the recording of a motion picture.
•
Zoom speed may be slower than normal in recording motion pictures.
•
If the Extra Optical Zoom was used before pressing the motion picture button, recordable area
will be changed drastically since these settings are cancelled.
•
Even if the aspect ratio setting is the same in still and motion pictures,
the angle of view may change at the start of the motion picture
recording. When [
during motion picture recording is displayed.
A Example
When [REC MODE] is set to [AVCHD(1080i)] and the
image:
[ASPECT RATIO] is set to [W].
B :
This section is not recorded in motion pictures.
•
[STABILIZER] is fixed to [MODE1] in recording motion pictures.
•
When recording motion pictures, the following functions cannot be used.
–
[
], [
], [
] in the AF Mode
ƒ
Ù
(It will switch to [
Ø
–
Direction Detection function
–
Extra Optical Zoom
–
[FACE RECOG.]
–
[ISO LIMIT SET]
•
It is recommended to use a fully charged battery or AC adaptor (optional) when recording
motion pictures.
•
If while recording motion pictures using the AC adaptor (optional) the power supply is cut off
due to a power outage or if the AC adaptor (optional) is disconnected etc., the motion picture
being recorded will not be recorded.
Advanced (Recording pictures)
REC AREA]
(P27)
is set to [ON], angle of view
].)
- 90 -
A
B
Advertisement
Table of Contents
