Table of Contents
Advertisement
Note
•
The camera is focusing on all the AF areas when multiple AF areas (max. 11 areas) light at the
same time in [
]. If you want to determine the focus position to take pictures, switch the AF
Mode to [ƒ], [Ø] or [Ù].
•
If the AF Mode is set to [
•
Switch the AF Mode to [ƒ] or [Ø] if it is difficult to focus using [Ù].
•
The camera may detect subjects other than a person as a face. In this case, switch the AF
Mode to any modes other than [š] and then take a picture.
•
It will be fixed to [š] when the [FACE RECOG.] is set to [ON].
•
It is not possible to set [š] in the following cases.
–
In [PANORAMA ASSIST], [NIGHT SCENERY], [HANDHELD NIGHT SHOT], [FOOD],
[STARRY SKY], [FIREWORKS], and [AERIAL PHOTO] in Scene Mode.
•
It will be set to [Ø] when a recording is performed with the Touch Shutter function (P43).
∫ About [š] (Face Detection)
The following AF area frames are displayed when the camera
detects the faces.
Yellow:
When the shutter button is pressed halfway, the frame turns green
when the camera is focused.
White:
Displayed when more than one face is detected. Other faces that are the same distance
away as faces within the yellow AF areas are also focused.
•
Under certain picture-taking conditions including the following cases, the facial recognition
function may fail to work, making it impossible to detect faces. [AF MODE] is switched to [
–
When the face is not facing the camera
–
When the face is at an angle
–
When the face is extremely bright or dark
–
When there is little contrast on the faces
–
When the facial features are hidden behind sunglasses, etc.
–
When the face appears small on the screen
–
When there is rapid movement
–
When the subject is other than a human being
–
When the camera is shaking
–
When Digital Zoom is used
Advanced (Recording pictures)
], the AF area is not displayed until the picture is brought into focus.
- 117 -
].
Advertisement
Table of Contents
