Remote Operation With The Handset - Panasonic KX-TG2583PW Operating Instructions Manual

Remote Operation with the Handset

You can operate your answering system
with the handset.
The announcements and recorded
messages can only be heard with the
handset.
Summary of remote operation
(FLASH/CALL!WAIT/PLAYBACK)
Press
•The number of new messages is heard.
•"Remote operation" is displayed on the handset.
Enter the desired direct commands (p. 67).
•If you do not enter a command, the voice menu will start (see below).
•After the voice menu, all message playback will start.
To end remote operation, press
•The messages are saved.
•The unit will announce the remaining recording time after playback, if it is less
than 5 minutes.
•If the unit starts to ring during the remote operation, press (TALK) to answer the
call. The remote operation is ended.
•If you hear "Memory full" after playback, erase some, or all, of the messages
(p. 67).
Voice menu
If no commands are entered after you press
(FLASH/CALL!WAIT/PLAYBACK)
menu.
"Press 4 to play back new messages. Press 5 to play back all messages."
•You can enter direct commands even if the voice menu has started.
66
(FLASH/CALLÒWAIT/PLAYBACK)
.
(FLASH/CALL!WAIT/PLAYBACK)
, the unit will start the following voice
.