Operating Instructions; Starting Machine - B.W. Machinery BWM PRO 100 Series User Manual

PLATE AND PULL UP, MAKE THE PLATE OFF THE POSITION PIN(5). THEN
PULL OUT THE BOTTOM SIDE.
if you want to use the high output for loading, you can close the low output in return.
In the process of installation, do not place hands or any other body parts within
a radius of cutter wheel rotary. Do not touch the blades with your hands or any
other body parts. Considering the heavy weight of the machine, please do not try to
install it by oneself in case of the possible injury. All bolts, nuts and washers have
been fixed on the machine in the factory, please remove them before assembly
and put back on the machine at the same locations.

4. Operating Instructions

4.1 Starting Machine:

❖ Before starting the engine, make sure the correct engine oil is added first (see
chapter 5.4). Ensure the machine is on stable level ground.
BWM PRO 100 Series Manual Book V1.01
B.W. Machinery
6