Stopping Machine; Basic Maintenance; Lubricating Oil - B.W. Machinery BWM PRO 100 Series User Manual

4.5 Stopping Machine:

Make sure the machine is completely emptied before stopping the engine (otherwise
rotor may be jammed when using it for next time).
Tips: Keep the machine running for another 1-2 minute after feeding the last branch,
then turn the throttle lever slowly to the lowest position before stopping the engine.

5. Basic Maintenance

Allow the machine to cool down before making any inspections or any
maintenance. (If the machine is equipped with an electrical start system, remove the
key from the contact and disconnect the battery)

5.1 Lubricating Oil

The main shaft bearing needs lubricating oil. After a period of usage, it is necessary
to grease the bearing. How often to lubricate is determined by the environment and
the frequency of usage. The bearing needs to be greased after 50 hours of operation as
insufficient lubricating oil can damage the bearing.
BWM PRO 100 Series Manual Book V1.01 9
B.W. Machinery