Emergency Button; Blocking Of The Rotor - B.W. Machinery BWM PRO 100 Series User Manual

4.3 Emergency Switch:
The emergency stop button is located on left side of chassis. Push the emergency stop
button by pressing the button and the engine will stop immediately. To release the
emergency stop button, turn the red button. Within half a turn, the button is released
(pump up)and you can restart the machine
4.4 Rotor Jammed:
The rotor may be blocked due to blunt blades, incorrect usage of emergency button
while chipping, machine not completely emptied before stopping the engine, or
engine has stopped due to overloading of the chipper with too much branches and etc.
Please follow the steps below to unblock the rotor.
❖ Switch off the engine, and remove the feeding chute.
❖ Remove the bearing cover holder from the bearing housing by loosening one bolt.
❖ Turn the rotor shaft in counter clockwise direction by rotor spanner.
❖ Use a branch or a stick to remove any blocked materials in the drum. Do not use
your hands.
BWM PRO 100 Series Manual Book V1.01 8
B.W. Machinery