Sharp AF-S80CX Service Manual page 15

Insert the closure assemblies on both
5
sides into the rails of the jamb.
6 Loosen screws on both sides of the
cabinet, then hang the base pan angle
on and secure the screws again.
7 Secure the base pan angle to the sill by
using the hole of the front side on the
angle with one screw. (L=1", 25.4mm)
8
Secure the top angle of the unit and the
top of the closure assemblies to the sash
with three of the provided screws. (L=1",
25.4mm)
And secure the bottom of the closure
assemblies to the sill with two of the
provided screws. (L=1", 25.4mm)
Cut the window sash foam seal to the
9
proper length and seal the opening be-
tween the top of the inside window sash
and the outside window sash.
Jamb
(Left)
Indoor
side
Closure assembly
(Left)
Indoor
side
Sill
Window sash foam seal
15
Closure assembly
(Left)
1/2 inches
(13mm)
Stool
Top angle
AF-S80CX