Makita 5903RKX1 Instruction Manual page 9

NOTE:
• Some items in the list may be included in the tool pack-
age as standard accessories. They may differ from
country to country.
Noise
The typical A-weighted noise level determined according
to EN60745:
Model 5603R
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Model 5143R
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Model 5703R, 5705R, 5903R
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Model 5103R
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model 5603R
Work mode: cutting wood
Vibration emission (a
Uncertainty (K): 1.5 m/s
Model 5103R, 5143R
Work mode: cutting wood
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: cutting metal
Vibration emission (a
Uncertainty (K): 1.5 m/s
Model 5703R
Work mode: cutting wood
Vibration emission (a
Uncertainty (K): 1.5 m/s
Model 5903R
Work mode: cutting wood
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: cutting metal
Vibration emission (a
Uncertainty (K): 1.5 m/s
Model 5705R
Work mode: cutting wood
Vibration emission (a
Uncertainty (K): 1.5 m/s
ENG905-1
): 91 dB (A)
pA
): 102 dB (A)
WA
): 88 dB (A)
pA
): 99 dB (A)
WA
): 92 dB (A)
pA
): 103 dB (A)
WA
): 87 dB (A)
pA
): 98 dB (A)
WA
ENG900-1
2
or less
): 2.5 m/s
h, W
2
2
or less
): 2.5 m/s
h, W
2
2
or less
): 2.5 m/s
h, M
2
2
): 3.5 m/s
h, W
2
2
): 3.0 m/s
h, W
2
2
): 4.0 m/s
h, M
2
2
): 2.5 m/s
h, W
2
• The declared vibration emission value has been mea-
sured in accordance with the standard test method and
may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the oper-
ator that are based on an estimation of exposure in the
actual conditions of use (taking account of all parts of
the operating cycle such as the times when the tool is
switched off and when it is running idle in addition to
the trigger time).
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible manufac-
turer declare that the following Makita machine(s):
Designation of Machine:
Circular Saw
Model No./Type:
5603R, 5703R, 5705R, 5903R, 5103R, 5143R
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by:
Makita International Europe Ltd.
Technical Department,
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
30.1.2009
Tomoyasu Kato
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
Director
ENG901-1
ENH101-16
9