Related Manuals for Makita 5603R
Summary of Contents for Makita 5603R
-
Page 1: Circular Saw
INSTRUCTION MANUAL Circular Saw 5603R 5703R 5705R 5903R 5103R 5143R 005391 DOUBLE INSULATION IMPORTANT: Read Before Using. -
Page 2: Specifications
The following show the symbols used for the equipment. to EN60745: Be sure that you understand their meaning before use. · Read instruction manual. Model 5603R,5703R Sound pressure level (L ) : 93 dB(A) · DOUBLE INSULATION Sound power level (L... -
Page 3: General Power Tool Safety Warnings
Power tool plugs must match the outlet. Never Circular Saw modify the plug in any way. Do not use any Model No./ Type: 5603R, 5703R, 5705R, 5903R, 5103R, adapter plugs with earthed (grounded) power 5143R tools. Unmodified plugs and matching outlets will are of series production and reduce risk of electric shock. - Page 4 Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Power tool use and care Keep cord away from heat, oil, sharp edges or Do not force the power tool. Use the correct moving parts.
- Page 5 GEB029-4 CIRCULAR SAW SAFETY Kickback causes and related warnings − kickback is a sudden reaction to a pinched, WARNINGS bound or misaligned saw blade, causing an uncontrolled saw to lift up and out of the performance and safety of operation. DANGER: Keep hands away from cutting workpiece toward the operator;...
- Page 6 To avoid kickback, do support board or panel near the cut. 000154 000194 Never force the saw. Forcing the saw can • cause uneven cuts, loss of accuracy, and possible kickback. Push the saw forward at a speed so that the blade cuts without slowing. Check lower guard for proper closing before each use.
- Page 7 Use the appropriate saw blade for the riving knife. For the riving knife to function, the body of Fig. 2 the blade must be thinner than the riving knife and the cutting width of the blade must be wider than the thickness of the riving knife.
-
Page 8: Functional Description
45° angle cuts or the 60° notch for 60° angle cuts. 005393 Riving knife adjustment For model 5603R, 5703R,5705R, 5903R, 5103R Loosen the clamping screws in front and back, and tilt the 1. Setting tool to the desired angle for bevel cuts (0° - 45°). Secure protuberances 2. -
Page 9: Removing Or Installing Saw Blade
2. Switch trigger Be sure the blade is installed with teeth pointing up • at the front of the tool. Use only the Makita wrench to install or remove the • blade. Never depress the shaft lock while the saw is •... -
Page 10: Operation
005403 Rip fence (Guide rule) To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts. 005402 The handy rip fence allows you to do extra-accurate straight cuts. -
Page 11: Optional Accessories
Some items in the list may be • included in the tool package as standard accessories. They may differ from country to country. This manual has been written and prepared by Makita Corporation. Makita Corporation Anjo, Aichi, Japan www.makita.com 884364H224...