Table of Contents
Advertisement
If you are not sure about the WPS compatibility (connecting by [Manual Connection])
Search for available wireless access points.
•
Confirm encryption key of the selected wireless access point if the network authentication is
encrypted.
•
When connecting by [Manual Input], confirm SSID, encryption type, encryption key of the wireless
access point you are using.
1
Press 3/4 to select the wireless access point you are
connecting to, and press [MENU/SET].
•
Pressing [DISP.] will search for a wireless access point again.
•
If no wireless access point is found, refer to
[Manual Input]
2
(If network authentication is encrypted)
Enter the encryption key.
•
For details on how to enter characters, refer to
on P80.
When connecting with [Manual Input]
∫
1
On the screen displayed in step
compatibility (connecting by [Manual Connection])", select [Manual Input] by
pressing 3/4, then press [MENU/SET].
2
Enter the SSID of the wireless access point you are connecting to, then select [Set].
•
For details on how to enter characters, refer to
3
Press 3/4 to select the network authentication type, and press [MENU/SET].
•
For information on network authentication, see the manual of the wireless access point.
4
Press 3/4 to select the encryption type, and press [MENU/SET].
•
The type of settings that can be changed may vary depending on the details of network
authentication settings.
Network authentication type
[WPA2-PSK]/[WPA-PSK]
[Common Key]
[Open]
5
(When an option other than [No Encryption] is selected)
Enter the encryption key and select [Set].
•
Check the wireless access points instruction manual and settings when a saving wireless access
point.
•
If no connection can be established, the wireless access point's radio waves may be too weak. Refer
"
to
Message Display
•
Transmission speed may decrease, or may not be usable depending on the environment it is used
in.
"
on P139.
"
"
(P196)
and
Troubleshooting
Wi-Fi
"
When connecting with
"
Entering Text
1
of "If you are not sure about the WPS
"
Entering Text
Encryption types that can be set
[TKIP]/[AES]
[WEP]
[No Encryption]/[WEP]
"
(P200)
for details.
- 139 -
"
section
"
section on P80.
Advertisement
Table of Contents
