Table of Contents
Advertisement
4.
PROGRAM
5.
NEXT,+,-
6.
PROGRAM
7.
NEXT
8.
+/-
9.
NEXT
10.
+/-
11.
NEXT
12.
+/-
13.
NEXT
14.
+/-
15.
NEXT
16.
+/-
17.
NEXT
18.
+
19.
PROGRAM
20.
NEXT
21.
NEXT
22.
+
23.
NEXT
24.
+
25.
NEXT
26.
NEXT
27.
+
28.
NEXT,+
29.
NEXT,+,-
30.
RUN
Example No. 3
16
Display shows TIME header.
Use these keys to set time, date and daylight savings time information.
Press PROGRAM key to step through headers until ASTR (astro
header) is reached.
Sunrise time is displayed with hours flashing.
Set to today's sunrise hour.
Sunrise minutes are flashing.
Set to today's sunrise minutes.
Sunset time is displayed with hours flashing.
Set to today's sunset hour.
Sunset minutes are flashing.
Set to today's sunset minutes.
LATT N-10o is displayed (latitude 10o north).
Roll to the desired latitude.
Displays CHAN 1 NO.
Change NO to YES to assign astro to channel 1.
Press PROGRAM key to step through headers until EVNT (event
header) is reached.
First event is shown with event # flashing.
Event type is flashing.
Select ON event type.
Hours are flashing.
Roll hours to 4 AM.
Minutes are flashing. 00 is desired value.
SUN is flashing. NO is displayed.
Change NO to YES to assign this ON event to Sunday.
Assign this ON event to MON - SAT.
Second event is shown with event # flashing. Program this second
event as an OFF at 11:00 PM for SUN - SAT.
Programming is complete. The control will perform a status update
before going into the RUN mode.
Operation of Enabler Input
Advertisement
Table of Contents
