Holiday - Paragon EL78 General Instructions Manual

Select YES for each day that is to be included in this sensor event.
Program the turn on setpoint.
Program the turn off setpoint.

Holiday

Holiday header. The four holiday types with their priorities are as follows:
To demonstrate the use of priorities assume that Thanksgiving Break (SPEC) is pro-
grammed as a holiday schedule B. Also assume that Nov. 1st to Nov. 30th (SPAN) is
programmed as a holiday schedule A. Then on Thanksgiving Day and the Friday after,
the control will execute the events that include HOLIDAY B in their day field since
SPEC is a higher priority than SPAN. The rest of November the control will use events
that include HOLIDAY A in their day fields. The other 11 months (assuming no other
holidays) will be controlled according to the events programmed for the normal days
(SUN - SAT).Use the NEXT key to begin programming
Special Holiday type. Each of 6 special holidays can either be assigned as one of the
3 holiday schedules A, B or C or not selected. Press the NEXT key to program the
special holidays (starting with Good Friday) or press the +/- keys to move to a differ-
ent holiday type (e.g. Date).
Good Friday
Easter Sunday
Easter Monday
Thanksgiving Break (Thursday and Friday)
Boxing Day
Victoria Day
Holiday Date type. Up to 10 date type holidays can be programmed. Press the NEXT
key to program the date type holidays or press the +/- keys to move to a different holi-
day type (e.g. day of week).
NONE indicates that this holiday (date) number (1-10) is not used (no holiday sched-
ule has been selected). Press the NEXT key to program this holiday (date) or press
the +/- keys to move to other holiday (date) number(s).
Program the month, date and holiday schedule while each of these parameters are
flashing.
Day of Week Holiday type. Up to 10 day of week type holidays can be programmed.
Examples of day of week type holidays are:
Press the NEXT key to program the day of week type holidays or press the +/- keys to
move to a different holiday type (e.g. SPAN).
NONE indicates that this holiday (day of week) number (1-10) is not used (no holiday
schedule has been selected). Press the NEXT key to program this holiday (day of
week) or press the +/- keys to move to other holiday (day of week) numbers.
This screen shows holiday #2 is programmed as the 1st Sunday in January with holi-
day schedule A assigned. Program the month, week no.(1st, 2nd, 3rd, 4th or last), day
and holiday schedule while each of these parameters are flashing.
SPEC (special) - highest priority
DATE (month/date) - 2nd highest priority
D/WK (day of week) - 3rd highest priority
SPAN (duration) - lowest priority
1st Monday in September
Last Monday in May
11