Finalize Dvd+R; Erase Dvd+Rw; Recording Settings; Recording Quality - GoVideo R6540 User Manual

Finalize DVD+R

Finalizes a DVD+R disc so it will play in most DVD players.
• Use the / buttons to select Finalize.
• Use the / buttons to select Confirm (or Cancel). If you select
Confirm, the DVD+R will be closed to further recording and will
be compatible with most DVD players.

Erase DVD+RW

Erases a DVD+RW disc so it can be recorded over again.
• Use the / buttons to select Erase.
• Use the / buttons to select Confirm (or Cancel). If you select
Confirm, the DVD+RW will be erased.

:: Recording Settings

Use to set the default recording quality and Auto Chapter setting.
1 Press Setup.
2 Use the / buttons to select Recording.
Recording Menu
3 Choose from the following:
44

Recording Quality

Sets the default quality level for DVD recording:
• Use the / buttons to select Quality and press Play
• Use the / buttons to select from the following:
HQ - 1 hr.
Select for High Quality mode (comparable to DVD quality)
SP - 2 hrs.
Select for Standard Play mode
LP - 3 hrs.
Select for Long Play mode (comparable to S-VHS quality)
EP - 4 hrs.
Select for Extended Play mode
SLP - 6 hrs.
Select for Super Long Play mode (comparable to VHS quality).
• Press Play /Enter to confirm your selection.

Auto Chapter

Enables Auto Chapter mode, where the DVD Recorder will automati-
cally create new Chapters on your DVD+R/+RW every 5 minutes
during recording.
• Use the / buttons to select Auto Chapter and press Play
Enter.
• Use the / buttons to select On or Off and press Play
/Enter.
/
/Enter.