Hardware Design In Considerations; Installation; Package Inspection - UNICORECOMM UB4B0 User Manual

 Support BDS, GPS, GLONASS, Galileo and QZSS etc.
 Hardware size compatible with current GNSS OEM boards
 Support GPS/BDS/GLONASS/Galileo single system positioning and multi-system
positioning
 Support advanced multi-path mitigation and low angle tracking
 Support Rover station RTK
 Millimeter-lever Carrier-phase Observation Data
 High reliability、High stability、suitable for challenging environment
 On board MEMS integrated navigation *
 Support RS232, Ethernet，1PPS，external clock input

2 Hardware Design in Considerations

To keep UB4B0 functioning normally, the following signals need to be connected correctly：
 The module VCC power-on has good monotone, the initial level is lower than 0.4V,
and the undershoot and ringing should be guaranteed within 5% VCC
 It is recommended to use a power chip with current output capacity greater than
2A to power the board

3 Installation

This section contains the list of the product package and the details of product
installation.

3.1 Package Inspection

Please check the contents of the package carefully after receiving the package of UB4B0：
 UB4B0 board and EVK suite (or evaluation board) (or enclosure)
 User manual (CD attached)
 Command manual (CD attached)
 UPrecise software (CD attached)
UB4B0 User
2
Manual