Sony DCR-TRV940 Operating Instructions Manual page 33

Recording a picture
Indicators displayed in the recording
Indicators are not recorded on tapes.
50
min REC
JUL 4 2002
Remaining battery time indicator during recording
The remaining battery time indicator roughly indicates the continuous recording time.
The indicator may not be correct, depending on the conditions in which you are
recording. When you close the LCD panel and open it again, it takes about one minute
for the correct remaining battery time in minutes to be displayed.
Time code
The time code indicates the recording or playback time, "0:00:00" (hours : minutes :
seconds) in CAMERA and "0:00:00:00" (hours : minutes : seconds : frames) in VCR.
You cannot rewrite only the time code.
Remaining tape indicator
The indicator may not be displayed accurately depending on the tape.
Recording data
The recording data (date/time or various settings when recorded) are not displayed
while recording. However, they are recorded automatically on the tape. To display the
recording data, press the DATA CODE button during playback. You can also use the
Remote Commander for this operation (p. 41).
Remaining battery time
Cassette memory
This appears when using a cassette with cassette memory.
Recording mode
STBY/REC
0:00:01 Time code/Tape counter
45min
Remaining tape
This appears after you insert a cassette and record or
play back for a while.
12:05:56PM
FN button
FN
Press this button to display operation buttons on the
LCD screen.
Time
The time is displayed about five seconds after the
power is turned on.
Date
The date is displayed about five seconds after the
power is turned on.
33