Sony DCR-TRV940 Operating Instructions Manual page 60

Using special effects – Digital effect
(1) Press FN to display PAGE1 while the POWER switch is set to CAMERA.
(2) Press DIG EFFT. The screen to select a desired digital effect appears.
(3) Press a desired mode. In the STILL and LUMI. modes, the still image is stored
(4) Press –/+ to adjust the effect.
(5) Press
1
To return to FN
Press EXIT.
To cancel the digital effect
Press
60
in memory.
– : To reduce the effect
+: To increase the effect
Items to be adjusted
STILL The rate of the still image you want to superimpose on the moving
picture
FLASH The interval of frame by frame playback
LUMI. The color scheme of the area in the still image which is to be
swapped with a moving picture
TRAIL The vanishing time of the incidental image
OLD MOVIE No adjustment necessary
OK to return to PAGE1.
FN
OFF to return to PAGE1.
2~4
DIG
DIG EFFT
OFF
EFFT
OLD
MOVIE
STILL
The bar appears when setting following
digital effects modes : STILL, FLASH,
LUMI., TRAIL.
DIG EFFT
OK OFF
–
FLASH LUMI. TRAIL
OK
+
LUMI.