Original
(Default) Outputs the CD digital audio from the optical/coaxial
digital audio outputs in its original format.
PCM
Outputs 2-channel digital audio from the optical/coaxial digital
audio outputs.
Off
Disables CD audio output.
LPCM Setting
Sets the outgoing digital audio format of LPCM tracks:
•
Select More and press ENTER.
•
Select LPCM, and then use the / keys to select:
Original
(Default) Outputs the LPCM digital audio from the optical/coaxial
digital audio outputs in its original format.
PCM
Outputs 2-channel digital audio from the optical/coaxial digital
audio outputs.
Off
Disables LPCM audio output.
VCD Setting
Sets the outgoing digital audio format of VCD tracks:
•
Select More and press ENTER.
•
Select VCD, and then use the / keys to select:
Bitstream
(Default) Outputs the raw VCD digital audio from the optical/
coaxial digital audio outputs.
PCM
Outputs 2-channel digital audio from the optical/coaxial digital
audio outputs.
Off
Disables VCD audio output.
Speaker Test
Adjusts the sound balance of your speakers. Use only if you con-
nected the D2730 to a 5.1-channel amplifier:
•
Select More and press ENTER.
•
Select Speaker Test and press ENTER.
Speaker Test Menu
•
A "pink noise" test tone is automatically sent to each of the six
speakers in a continuous loop.
•
The test tone is broadcast for approximately 5 seconds in each
speaker in the following order: Left, Right, Left Surround, Right
Surround, Center, Subwoofer.
•
Adjust the speaker levels as required by your amplifier.
•
When finished, press STOP
4 Select OK and press ENTER.
5 Press SETUP or RETURN
to cancel the test tone.
to exit the Setup menu.
45