Table of Contents
Advertisement
3-5 Replacement of Door Glass (Continued)
The Assembly is reverse order of disjointing.
Parts
Door Glass
3-6 Replacement of the rear oven Lamp Bulb
The Assembly is reverse order of disjointing.
Parts
Explaination Photo
Lamp Bulb
Glass cap
3-7 Replacement of the side Halogen Lamp (Optional)
The Assembly is reverse order of disjointing.
Side Lamp is optional, refer to specification of model.
Parts
Explaination Photo
Lamp Bulb
Explaination Photo
Door Bracket
Holder Glass
Rubber
Glass #1
Glass #2
Glass #3
Sheet ring
Metal ring
Lamp
1. Take off the cap by turning counterclockwise.
2. Remove the metal ring and the sheet ring and clean the
glass cap.
3. If necessary, replace the bulb with a 25 watt, 230 V, 300 °C
heat - resistant oven light bulb.
4. Fit the metal and the sheet ring to the glass cap.
5. Replace the glass cap.
1. To remove the glass cover, hold the lower end with one
hand, insert a flat sharp implement such as a table knife
between the glass and the frame and pop out the cover.
2. If necessary, replace the halogen bulb with a 25 ~ 40 watt,
230 V, 300 °C heat - resistant halogen oven light bulb.
Always use a cloth when handling a halogen bulb to
avoid depositing oils from your fingers on to the surface
of the bulb.
3. Replace the glass cover.
- 9 -
Explaination
Explaination
Explaination
Tip
Advertisement
Table of Contents
