Table of Contents
Advertisement
AUDIO
Controls the volume of the speakers or headphones.
To mute the speaker output, select Audio icon and touch "INPUT/RESET".
BRIGHTNESS
Adjusts the overall image and background screen brightness.
To enter the ECO MODE, touch the "INPUT/RESET" button.
ECO MODE OFF: Sets brightness variable from 0% to 100%.
ECO MODE1: Sets brightness 80%.
This setting can adjust brightness within the range that power has reduced 10% from maximum brightness setting.
ECO MODE2: Sets brightness 40%.
This setting can adjust brightness within the range that power has reduced 38% from maximum brightness setting.
CONTRAST
Adjusts the image brightness in relation to the background.
To enter the DV MODE setting, select CONTRAST icon and set DV MODE to OFF, then touch the "INPUT/RESET" key.
DV MODE: Setting that adjusts the brightness by detecting the screen's black areas and optimizes it.
NOTE: OFF is used for TCO Certificate compliance.
AUTO CONTRAST (Analog input only)
Adjusts the image displayed for non-standard video inputs.
To enter the DV MODE setting, touch the "INPUT/RESET" key.
AUTO ADJUST (Analog input only)
Automatically adjusts the Image Position, the H. Size and Fine setting.
LEFT/RIGHT (Analog input only)
Controls Horizontal Image Position within the display area of the LCD.
DOWN/UP (Analog input only)
Controls Vertical Image Position within the display area of the LCD.
H. SIZE (Analog input only)
Adjusts the horizontal size by increasing or decreasing this setting.
FINE (Analog input only)
Improves focus, clarity and image stability by increasing or decreasing this setting.
COLOR CONTROL SYSTEMS
Five color presets (9300/7500/sRGB/USER/NATIVE) select the desired color setting.
COLOR RED
Increase or decreases Red. The change will appear on screen.
COLOR GREEN
Increase or decreases Green. The change will appear on screen.
COLOR BLUE
Increase or decreases Blue. The change will appear on screen.
TOOL
Selecting TOOL allows you to get into the sub menu.
FACTORY PRESET
Selecting Factory Preset allows you to reset all OSD control settings back to the factory settings. The INPUT/RESET
button will need to be held down for several seconds to take effect. Individual settings can be reset by highlighting the
control to be reset and touching the INPUT/RESET button.
EXIT
Selecting EXIT allows you exit OSD menu/ sub menu.
English-11
Advertisement
Table of Contents
