Advertisement
Product Name:
SKU #:
Thank you for purchasing this Luxen Home product. This product has been manufactured with the highest
standards of safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or damaged
parts. If any parts are missing or damaged, do not attempt to assemble or use the product.
CARTON CONTENTS:
Description
Fountain
Birds
Pump
LED Connector and Plug
Compatible Pumps for this fountain:
Pump Model No.
JR600
JB650
YH560
Tools required for assembly: No tools required for assembly.
Assembly Instructions:
1. Unpack the contents of the box and check to make sure that all items are accounted for and in good
condition.
2. Select a flat, level surface for the assembly and final location of your fountain.
3. From the opening at the back of the fountain, insert the water supply tube into the pump outlet. Insert the
LED connector into the LED connector, and twist to tighten. Place the pump upright in the basin and draw
the pump power cord out of the fountain back.
4. Add clean water to the fountain. The water level should be approximately 30mm lower than the edge of the
basin.
5. Connect the power cables for the pump and the LED light to the outlet. If installed properly, water flow in
the fountain will begin shortly. Lights are turned on and off by plugging into an electrical outlet for on, and
removing the plug of the LED connection from the outlet for off.
6. Please do not use the electrical plug in wet weather conditions. Please note: On first use, there may be air in
the pump. It may take several minutes until all the air escapes.
7. To eliminate the possibility of water damage around your fountain, check for leaks and excessive splashing
after the initial setup of your fountain. It is highly recommended that this fountain be placed in an area
where it cannot be damaged.
Gray Cement Waterfall and Bronze Birds Outdoor Fountain with LED Light
WHF1011
Quantity
1
5
1
1
Contact: sales@winsomehouse.com
Please save this manual for future reference.
Instruction Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Luxen Home WHF1011
Summary of Contents for Luxen Home WHF1011
- Page 1 Gray Cement Waterfall and Bronze Birds Outdoor Fountain with LED Light SKU #: WHF1011 Thank you for purchasing this Luxen Home product. This product has been manufactured with the highest standards of safety and quality. PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
- Page 2 Product Name: Gray Cement Waterfall and Bronze Birds Outdoor Fountain with LED Light SKU #: WHF1011 8. Do not leave your fountain running for extended periods of time when no one is present to observe the performance. 9. Check the area around your fountain on a regular basis to ensure that there is no leakage.
- Page 3 Please save this manual for future reference. Product Name: Gray Cement Waterfall and Bronze Birds Outdoor Fountain with LED Light SKU #: WHF1011 Pump Instructions: Special Warnings and Cautions: CAUTION: The pump has been evaluated for use with water only.
- Page 4 Product Name: Gray Cement Waterfall and Bronze Birds Outdoor Fountain with LED Light SKU #: WHF1011 WARNINGS: 1. To reduce the risk of electric shock, connect only to a properly grounded, grounding type receptacle. 2. To reduce the risk of electric shock, use only on portable self-contained fountains no larger than 5 feet in any dimension.
- Page 5 Product Name: Gray Cement Waterfall and Bronze Birds Outdoor Fountain with LED Light SKU #: WHF1011 TIPS AND TROUBLESHOOTING: 1. Ensure that the pump’s flow control switch is set to maximum (+) before operating. Once the flow is established, the pump can be adjusted downward to the desired level.
Need help?
Do you have a question about the WHF1011 and is the answer not in the manual?
Questions and answers