Advertisement
Product Name:
SKU #:
Thank you for purchasing this Luxen Home product. This product has been manufactured with the highest
standards of safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or damaged
parts. If any parts are missing or damaged, do not attempt to assemble or use the product.
CARTON CONTENTS:
Description
Fountain
Well Handle
Pump w/ Adapter
Compatible Pumps for this fountain:
Pump Model No.
JR-600/LED
JB650/LED
YH560/LED
Tools required for assembly: No tools required for assembly.
Assembly Instructions:
1. Unpack the contents of the box and check to make sure that all items are accounted for and in good
condition.
2. Select a flat, level surface for the assembly and final location of your fountain.
3. Attach the well handle to the fountain. From the opening in the back of the fountain, insert the LED
connector into the pump connector, and twist to tighten. Insert the water tube into the pump, and place the
electric pump inside the fountain. Draw out the pump cord from the back of the fountain.
4. Add clean water to the fountain. The water level should be approximately 30mm lower than the edge of the
basin.
5. Connect the power cable to outlet. If installed properly, water flow in the fountain will begin shortly.
6. Please do not use the electrical plug in wet weather conditions. Please note: On first use, there may be air in
the pump. It may take several minutes until all the air escapes.
7. To eliminate the possibility of water damage around your fountain, check for leaks and excessive splashing
after the initial setup of your fountain. It is highly recommended that this fountain be placed in an area
where it cannot be damaged.
8. Do not leave your fountain running for extended periods of time when no one is present to observe the
performance.
9. Check the area around your fountain on a regular basis to ensure that there is no leakage.
Resin Rustic Well and Planter Outdoor Fountain with LED Light
WHF1057
Quantity
1
1
1
Contact: cs@winsomehouse.com
Instruction Manual
Please save this manual for future reference.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Luxen Home WHF1057
Summary of Contents for Luxen Home WHF1057
- Page 1 Resin Rustic Well and Planter Outdoor Fountain with LED Light SKU #: WHF1057 Thank you for purchasing this Luxen Home product. This product has been manufactured with the highest standards of safety and quality. PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
- Page 2 Resin Rustic Well and Planter Outdoor Fountain with LED Light SKU #: WHF1057 10. Please refresh the fountain with water each week to ensure it in good condition. 11. Do not add any harmful chemicals to the water as it may alter the finish.
- Page 3 Instruction Manual Please save this manual for future reference. Product Name: Resin Rustic Well and Planter Outdoor Fountain with LED Light SKU #: WHF1057 Pump Instructions: Special Warnings and Cautions: CAUTION: • The pump has been evaluated for use with water only.
- Page 4 Product Name: Resin Rustic Well and Planter Outdoor Fountain with LED Light SKU #: WHF1057 WARNINGS: 1. To reduce the risk of electric shock, connect only to a properly grounded, grounding type receptacle. 2. To reduce the risk of electric shock, use only on portable self-contained fountains no larger than 5 feet in any dimension.
- Page 5 Product Name: Resin Rustic Well and Planter Outdoor Fountain with LED Light SKU #: WHF1057 TIPS AND TROUBLESHOOTING: 1. Ensure that the pump’s flow control switch is set to maximum (+) before operating. Once the flow is established, the pump can be adjusted downward to the desired level.
Need help?
Do you have a question about the WHF1057 and is the answer not in the manual?
Questions and answers