Advertisement
Product Name:
SKU #:
Thank you for purchasing this Luxen Home product. This product has been manufactured with the highest
standards of safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or damaged
parts. If any parts are missing or damaged, do not attempt to assemble or use the product.
CARTON CONTENTS:
Description
Fountain Top
Birds
Fountain Base
Pump
Compatible Pumps for this fountain:
Pump Model No.
JR-600/LED
JB650/LED
YH560/LED
Tools required for assembly: No tools required for assembly.
Assembly Instructions:
1. Unpack the contents of the box and check to make sure that all items are accounted for and in good
condition.
2. Select a flat, level surface for the assembly and final location of your fountain.
3. Place fountain top onto base (be sure to line up the tube to the opening in the fountain base). Insert birds
into fountain top.
4. From the opening in the back of the fountain, insert the LED connector into the pump connector, and twist
to tighten. Insert the water tube into the pump, and place the electric pump inside the fountain. Draw out
the pump cord from the back of the fountain.
5. Add clean water to the fountain. The water level should be approximately 30mm lower than the edge of the
basin.
6. Connect the power cable to outlet. If installed properly, water flow in the fountain will begin shortly.
7. Please do not use the electrical plug in wet weather conditions. Please note: On first use, there may be air in
the pump. It may take several minutes until all the air escapes.
8. To eliminate the possibility of water damage around your fountain, check for leaks and excessive splashing
after the initial setup of your fountain. It is highly recommended that this fountain be placed in an area
where it cannot be damaged.
Cement Modern Column and Bowls Outdoor Fountain with LED Light
WHF1056
Quantity
1
2
1
1
Contact: cs@winsomehouse.com
Instruction Manual
Please save this manual for future reference.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Luxen Home WHF1056
Summary of Contents for Luxen Home WHF1056
- Page 1 Cement Modern Column and Bowls Outdoor Fountain with LED Light SKU #: WHF1056 Thank you for purchasing this Luxen Home product. This product has been manufactured with the highest standards of safety and quality. PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
- Page 2 Product Name: Cement Modern Column and Bowls Outdoor Fountain with LED Light SKU #: WHF1056 9. Do not leave your fountain running for extended periods of time when no one is present to observe the performance. 10. Check the area around your fountain on a regular basis to ensure that there is no leakage.
- Page 3 Instruction Manual Please save this manual for future reference. Product Name: Cement Modern Column and Bowls Outdoor Fountain with LED Light SKU #: WHF1056 Pump Instructions: Special Warnings and Cautions: CAUTION: • The pump has been evaluated for use with water only.
- Page 4 Product Name: Cement Modern Column and Bowls Outdoor Fountain with LED Light SKU #: WHF1056 WARNINGS: 1. To reduce the risk of electric shock, connect only to a properly grounded, grounding type receptacle. 2. To reduce the risk of electric shock, use only on portable self-contained fountains no larger than 5 feet in any dimension.
- Page 5 Product Name: Cement Modern Column and Bowls Outdoor Fountain with LED Light SKU #: WHF1056 TIPS AND TROUBLESHOOTING: 1. Ensure that the pump’s flow control switch is set to maximum (+) before operating. Once the flow is established, the pump can be adjusted downward to the desired level.
Need help?
Do you have a question about the WHF1056 and is the answer not in the manual?
Questions and answers