Settings - AEG FAVORIT55320IM0 User Manual

Programme
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
5.2 Information for test
institutes
For all the necessary information for test
performance, send an email to:

6. SETTINGS

6.1 Programme selection
mode and user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
In user mode, the following settings
can be changed:
• The level of the water softener
according to the water hardness.
• The deactivation of the rinse aid
dispenser when you want to use the
Multitab option without rinse aid.
These settings will be saved until you
change them again.
6.2 The water softener
The water softener removes minerals
from the water supply, which would have
Water hardness
German de-
grees (°dH)
47 - 50
43 - 46
37 - 42
29 - 36
Water
1)
(l)
13 - 14
9
4
French degrees
(°fH)
84 - 90
76 - 83
65 - 75
51 - 64
Energy
(kWh)
0.7 - 0.9
0.9
0.1
info.test@dishwasher-production.com
Write down the product number (PNC)
that is on the rating plate.
a detrimental effect on the washing
results and on the appliance.
The higher the content of these minerals,
the harder your water is. Water hardness
is measured in equivalent scales.
The water softener should be adjusted
according to the hardness of the water in
your area. Your local water authority can
advise you on the hardness of the water
in your area. It is important to set the
right level of the water softener to assure
good washing results.
mmol/l Clarke de-
grees
8.4 - 9.0 58 - 63
7.6 - 8.3 53 - 57
6.5 - 7.5 46 - 52
5.1 - 6.4 36 - 45
ENGLISH 45
Duration
(min)
70 - 80
30
14
Water softener lev-
el
10
9
8
7