Change The Remote Access Pin/Passcode; Charge The Handset; Check The Battery Level - Philips D705 Series Extended User Documentation

Set the date and time
1
Select [Menu] >
press [OK] to confirm.
2
Select [Set date]/[Set time], then press
[OK] to confirm.
3
Press the numeric buttons to enter the
date and time.
Note
•
If the time is in 12-hour format, press
or [pm] (Country dependent).
4
Press [OK] to confirm.
Set the date and time format
1
Select [Menu] >
press [OK] to confirm.
2
Select [Date format] or [Time format].
3
to select [DD-MM-YYYY]
Press /
or [MM-DD-YYYY] as the date display,
and [12 Hours] or [24 Hours] as the time
display. Then press [OK] to confirm.
» The setting is saved.
Note
•
The date and time format setting is country dependent.
Change the remote access
PIN/passcode
Note
•
The default answering machine remote access PIN/
passcode is 0000 and it is important to change it to
ensure the security.
•
This feature is available only for D705.
1
Select [Menu] >
[Change PIN], then press [OK] to confirm.
12 EN
> [Date & time], then
to select [am]
> [Date & time], then
> [Remote access] >
2
Enter the old PIN/passcode, then press
[OK] to confirm.
3
Enter the new PIN/passcode, then press
[OK] to confirm.
4
Enter the new PIN/passcode again, then
press [Save] to confirm.
» The setting is saved.

Charge the handset

Place the handset on the base station to
charge the handset. When the handset is
placed correctly on the base station, you hear
a docking tone (see 'Set the docking tone' on
page 31).
» The handset starts charging.
Note
•
Charge the batteries for 8 hours before first use.
•
If the handset becomes warm when the batteries are
being charged, it is normal.
•
Over time, capacity of batteries decreases. This is a
normal battery behavior.
Your phone is now ready to use.

Check the battery level

The battery icon displays the current battery
level.