Table of Contents
Advertisement
6.
In the Add Standard TCP/IP Printer Port Wizard box as shown in the following picture,
Select Custom, Click Settings button, and click Next.
7.
In the Configure Standard TCP/IP Port Monitor box as shown in the following picture,
select LPR form Protocol, type in a queue name, e.g. lp1 for port-1, lp2 for port-2 and lp3
for port-3 of print server.
8.
Click OK, and Next.
Note: Please DO NOT type any other name than lp1, lp2 and lp3 in this step.
55
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the RP-UB2803B and is the answer not in the manual?