Repotec RP-UB2803B Manual page 45

snmp.snmpEnableAuthenTraps
Users can set up print server's SNMP functions by using their browsers.
1. Click Setup, it then appears the sub-menu.
2. Click SNMP, it then as shown in the following picture.
SNMP Community: The print server supports up to two community names. The default
Support HP WebJetAdmin: This option allows user determine to disable/enable the
SNMP Traps: Enable the function of sending SNMP Authentication Failure trap message to
the network administrator, if the community name within a SNMP request is
not correct.
Enables or
Authentication
administrator, if the community name within a SNMP request is
not correct.
community name is public (case-sensitive), with Read Only access
right in default.
Support HP WebJetAdmin.
disables the function
Failure trap message
45
of sending SNMP
to the network