Table of Contents
Advertisement
Upgrade
Upgrade allows the user to upgrade the print server device. In order to upgrade the unit
please perform the steps as follows:
1. Click Upgrade button just like a picture ＜
2.
elect General Upgrade. Make sure that the upgrade file is located in the same
S
directory as PSAdmin.
Reset
1. Click Reset button just like a picture ＜
2. Reset allows the user to reset the print server device in order to establish a new
connection or for new settings to take effect.
Refresh
1. Click Reset button just like a picture ＜
2. Refresh searches the network for all attached print server(s).
＞, as shown as follow picture
＞.
＞.
23
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the RP-UB2803B and is the answer not in the manual?