1. Manuals
  2. Brands
  3. Repotec Manuals
  4. Print Server
  5. RP-2803
  6. Manual

Repotec RP-2803 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
...................................................................................................................................................................... 3
1. INTRODUCTION .......................................................................................................................................................... 4
2. PRINT SERVER INSTALLATION .............................................................................................................................. 7
.................................................................................................................................................................. 7
3. SOFTWARE INSTALLATION .................................................................................................................................... 9
I
PSA
NSTALLING THE
DMIN AND
............................................................................................................................................................ 18
.......................................................................................................................................................................... 19
............................................................................................................................................................. 21
....................................................................................................................................................................... 23
4. INTERNET PRINTER CONNECTION AND HP WEB JETADMIN ..................................................................... 26
.............................................................................................................................................................. 26
5. CONFIGURATION FROM EMBEDDED WEB SERVER ..................................................................................... 30
..................................................................................................................................................................... 30
................................................................................................................................................................. 37
6. NETWORK PRINT MONITOR ................................................................................................................................. 48
................................................................................................................................................................ 48
7. TCP/IP LPR PORT PRINTING INSTALLATION ................................................................................................... 53
...................................................................................................................................................... 58
8. UPGRADING PRINT SERVER ................................................................................................................................ 63
..................................................................................................................................................................... 63
9. TROUBLESHOOTING .............................................................................................................................................. 66
T
...................................................................................................................................................... 4
........................................................................................................................................ 4
.............................................................................................................................................. 5
............................................................................................................................................... 6
: ........................................................................................................................ 6
................................................................................................................................. 7
P
S
RINT
ERVER
................................................................................................................. 24
PC ......................................................................................................... 24
.................................................................................................................................... 28
................................................................................................................................... 29
....................................................................................................................... 29
................................................................................................................................. 30
4.
/5.
X
........................................................................................................................ 44
............................................................................................................................... 49
............................................................................................................................ 50
..................................................................................................................... 53
.......................................................................................................................................... 53
C
ABLE OF
ONTENTS
'
............................................................................................. 9
...................................................................................................... 42
X
....................................................................................................... 49
/NT/2000/XP/2003 ............................................... 52
..................................................................................................... 53
........................................................................................................ 63
TCP/IP) ............................................................................. 64
....................................................................................................... 64
1
......................................................... 50
.............................................. 55
TCP/IP) .......................... 63

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RP-2803 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Repotec RP-2803

Summary of Contents for Repotec RP-2803

  • Page 1: Table Of Contents

    ABLE OF ONTENTS ..................................3 OPYRIGHT 1. INTRODUCTION ................................4 ..............................4 RODUCT VERVIEW ............................4 OMPONENTS AND EATURES .............................. 5 ARDWARE NSTALLATION ............................... 6 ETWORK NVIRONMENT : ........................6 IRED ETWORK WITH RINT ERVER 2. PRINT SERVER INSTALLATION ..........................7 ..................................
  • Page 2 ........................66 ENERAL ROUBLESHOOTING VERVIEW ............................66 OWER ELATED ROBLEMS ..........................67 RINT ELATED ROBLEMS 95/98/M /NT/2000/XP/2003/V ................ 67 INDOWS ISTA ROUBLESHOOTING ....................... 68 OVING THE PRINT SERVER TO EGMENT ......................69 OVING OMPUTER TO EGMENT ........................69 OVELL ROUBLESHOOTING TCP/IP T ............................

  • Page 3: Copyright

    Trademarks NetWare is a registered trademark of Novell Inc and Windows 95/98/Me and Windows NT/2000/XP/2003/Vista are registered trademarks of Microsoft Corp. All other brands and product names are trademarks of their respective companies. Copyright No part of this publication may be reproduced in any form or by any means or used to make any derivative (such as translation, transformation or adaptation) without the express written consent of the manufacturer as stipulated by the United States Copyright Act of 1976.

  • Page 4: Introduction

    1. Introduction Product Overview The external print servers enhance capability by letting you place your printers at convenient locations directly on the Ethernet network, and by increasing network printer performance and management. Please note that the print server does not support printing with host-based printers, e.g.

  • Page 5: Hardware Installation

    LED Indicators State Indication Blinking for POST When power switched on, the Status indicator will flash five Status (Green) times, and then on. Link On (Green) LAN Port has a valid network connection. Power On (Red) Print server’s power is on. Before you start, you should prepare the following items: One Windows-based computer with print server setup CD ...

  • Page 6: Network Environment

    LINK POWER Reset Button Network Environment Wired Network with Print Server:...

  • Page 7: Print Server Installation

    Print Server Installation Preparation To meet users’ network printing needs in today’s heterogeneous and multiple protocol networking environments, the print server supports industrial standard protocols, including TCP/IP, IPX/SPX, NetBEUI and AppleTalk. This means that the print server supports the most popular network operating systems today, including NetWare, Windows 95/98/Me/NT/2000/XP/2003/Vista, UNIX systems and Macintosh computer.
  • Page 8 NT/2000/XP/2003/Vist management of multiple printers- anywhere on your LAN print server, include alert and consumables Internet Printing Protocol Windows Printing via the Allows saving distribution of HQ hardcopy NT/2000/XP/2003/Vist internet to document over Internet, replacing fax, mail Internet Printing Protocol- enabled print server Comment...

  • Page 9: Software Installation

    3. Software Installation The PSAdmin is a proprietary Windows-based management program that can assist you in configuring and managing your print server in NetWare environments. The program can be installed from the setup CD of print server. Installing the PSAdmin and Print Server’s Driver To enable network communication with print server, your computer must have a proper IP address, e.g.
  • Page 10 Choose one to install the print server and configure the connected printer. Note: The setup CD will install the print server’s driver, PSAdmin and Setup Wizard into your computer. The default installation directory will be C:\Program files\Network Print Monitor. Click Next, the wizard will automatically discover the print server. From the Select A Print Sever screen, select the print server and its port number that you want to configure and click Next.
  • Page 12 On the Change Settings screen, select No or Yes: Click No if you want the print server to keep using the default IP address and keep the default settings: IP address: 192.168.0.10  Subnet Mask: 255.255.255.0  Click Yes if you want change IP address to the print server, and then click Next. Note: 1.
  • Page 13 Select Add New Printer if the print server is connected to a printer that hasn’t been installed before and does not appear in the list.
  • Page 14 Click Add New Printer to launch Windows Add Printer Wizard. Click Next and select Local Printer, make sure the Automatically detect and install my Plug and Play printer check box is NOT checked. Then click Next.
  • Page 15 10. Make sure the Use the following port radio-button is clicked and select LPT1: (recommended Printer Port) from the pull-down list. Then click Next. 11. Select Manufacturer and Printer from the lists of printer’s driver. Then click Next.
  • Page 16 12. If you already have the printer’s driver installed, you will be asked whether to keep it or to replace it. Click Next. Supply a name for the printer and choose whether you want to make it your default printer. Then click Next. 13.
  • Page 17 16. Right-click, select Properties -> Ports and verify that the print server’s port appears.

  • Page 18: Using Psadmin

    17. Go to General; click Print Test Page to verify the configuration. 18. Done. Note: If you want to install more print servers, start setup wizard from your Windows Start menu: start -> All Programs -> Network Print Server -> PSWizard and repeat the installation procedure.

  • Page 19: Wizard

    Wizard Wizard is a configuration program that can assist you in setting up the necessary parameters for your print server device to function. Setup a print server by using Wizard. TCP/IP Wizard Click Wizard button just like a picture ＜ ＞.and select TCP/IP Wizard.
  • Page 20 (Optional) In the Subnet Mask option, type the Subnet Mask your LAN or network segment is currently configured to use. (Optional) In the Gateway field, type the IP address of gateway. When done, click OK button. The program will save the above settings into the print server.

  • Page 21: Manual Setup

    Manual Setup Manual Setup is a configuration program designed for more experienced users of NetWare. To setup the print server by using Manual Setup follow the steps: 1. Run PCONSOLE in NetWare 3.x or NetWare 4.x and create the necessary parameters (Refer to your Novell NetWare print server/Services manual for details).
  • Page 22 Properties –TCP/IP Options The TCP/IP options allow you to modify the print server’s TCP/IP settings. Each option is detailed as follows. Obtain an IP address from a DHCP server: This option enables or disables the DHCP feature of the print server. When this option is enabled, the print server will obtain an IP address automatically from the DHCP server on your LAN.

  • Page 23: Refresh

    Upgrade Upgrade allows the user to upgrade the print server device. In order to upgrade the unit please perform the steps as follows: 1. Click Upgrade button just like a picture ＜ ＞, as shown as follow picture elect General Upgrade. Make sure that the upgrade file is located in the same directory as PSAdmin.

  • Page 24: Multiple Print Queues Configuration

    Note: Configure the print speed in the Advanced label, must match the printer’s speed which connect to the print server. Undependable configuration will cause printer to abnormal printing. Multiple Print Queues Configuration To configure the print server to service multiple print queues, please follow the instructions listed below: 1.
  • Page 25 4. Select Network Print Monitor for Windows 95/98/NT/2000/XP/2003 and click Change/Remove button. 5. The un-installation wizard program will be launched. 6. Follow the directions on the screen to complete the un-installation procedure.

  • Page 26: Internet Printer Connection And Hp Web Jetadmin

    4. Internet Printer Connection and HP Web JetAdmin IPP Overview Print server(s) support the Internet Printing Protocol (IPP). Using the appropriate software on your system, you can create an IPP print path from your system as Windows PC over the Internet.
  • Page 27 6. In URL’s box, input print server’s IP address, for example, http://192.168.10.182/lp1. Then Click Next. ** lp1 is the queue name for print port-1, lp2 for print port-2 and lp3 for print port-3. 7. It will check print server to connect to HP printer, if not, it will appear as follow picture. Then Click OK.

  • Page 28: Hp Web Jetadmin Overview

    9. If you want your Windows-based programs to use this printer as the default printer, please select “Yes”, and Click Next. It will appear as follow picture 10. Click Finish button. 11. Done. HP Web JetAdmin Overview HP Web JetAdmin allows you to use a Web browse to revise, view, manage and diagnose devices connected to the print server or any standard printer MIB devices.

  • Page 29: Installing Hp Web Jetadmin

    Installing HP Web JetAdmin Before installing the HP Web JetAdmin software, you must have domain administrator or root privileges: Download the installation files from HP Customer Care Online at http://www.hp.com/go/webjetadmin/. Follow the instructions on the screen to install the HP Web JetAdmin software. Note: Installation instructions are also contained in the HP Web JetAdmin install file.

  • Page 30: Configuration From Embedded Web Server

    5. Configuration from Embedded Web Server Overview The Print Server contains an embedded web server that can be accessed through a supported web browser on a LAN, for example, Microsoft Internet Explorer 5.01 or higher, Mozilla Firefox, Netscape 7.2 or higher, etc. The embedded web server provides access to configuration and management pages for the print server and the connected peripheral device.
  • Page 31 Print Server Name: This option allows you to view device name of the print server. To correct the print server’s device name. System Contact: This option allows you to view contact name of the print server. To check the print server’s contact name who in charge of this device. System Location: This option allows you to view Location name of the print server.
  • Page 32 Printer Status 1. Click Status, it then appears the sub-menu. 2. Click Printer, it then as shown in the following picture. Manufacturer: This option allows you to view manufacturer of the printer. When the printer connected with the print server, it will be show in the manufacture box. Model Number: This option allows you to view model of the printer.
  • Page 33 Current Status: This option allows you to view status of the printer. When the printer connected with the print server, it will be show in the status box. For Example, Waiting for job. It is means the printer already to printing. TCP/IP Status 1.
  • Page 34 General Settings: Print Server Name: This option allows you to view print server’s name would be configured by PSAdmin utility. Polling Time: This option allows you to view polling time from the print server. This function is search for NetWare Server by per time NetWare NDS Setting: Use NDS Mode: Enable or Disable.
  • Page 35 AppleTalk Status 1. Click Status, it then appears the sub-menu. 2. Click AppleTalk, it then as shown in the following picture. AppleTalk Settings: If no any zone exists, the print server itself displays the zone name as an asterisk (*) in the current AppleTalk Status of the print server in the web browser.
  • Page 36 SNMP Status 1. Click Status, it then appears the sub-menu. 2. Click SNMP, it then as shown in the following picture. SNMP Communities: This option allows you to view SNMP communities from the print server. There are two communities that control message from the network management of the print server.

  • Page 37: Setup Menu

    Workgroup Name: This option allows you to view the SMB Workgroup Name from the print server. It must match the SMB workgroup name of your Windows-based computer Shared Name: This option allows you to view the Shared Name from the print server. Setup Menu Meanwhile, you have finished the IP address configuration with print server.
  • Page 38 Email Alert: This option allows you to Enable/Disable the Email Alert support. SMTP Server IP Address: This option allows you to input the IP address of your Email SMTP server. Administrator E-mail Address: This option allows you to input your Email address that you want to receive the notification by Email.
  • Page 39 ˙User Name: You must be input the default administration user name, admin as login user name. ˙Password: The default password is empty. After setup password is completed from the print server, you shouldn’t forget this password. Printer Setup: 1. Click Setup, it then appears the sub-menu. Click Printer, it then as shown in the following picture.
  • Page 40 TCP/IP Setup: 1. Click Setup, it then appears the sub-menu. Click TCP/IP, it then as shown in the following picture. DHCP/BOOTP: This option allows you to select DHCP/ BOOTP option. If there is a DHCP/BOOTP server on your network. This option allows the print server to obtain IP-related settings automatically from your DHCP server.
  • Page 41 4. Click NetWare, it then as shown in the following picture. Print Server Name: This option allows you to input print server name which configured by PSAdmin utility or PCOMSOLE program. Polling Time: The time interval in which the print server unit polls the file server for servicing of print queues.

  • Page 42: Installing Print Server On Net Ware 4. X /5. X

    Installing Print Server on NetWare 4.x/5.x Due to its architecture and functionality, the print server must work under NetWare 4.x/5.x NDS Bindery Emulation. When you install the NetWare file server for the first time, by default, the installation program will automatically set up the Bindery Emulation function for you by adding “SET BINDERY CONTEXT =”...
  • Page 43 Note: Please refer to NetWare’s Print Server/Services manuals for detailed PCONSOLE commands. AppleTalk Setup The print server can print jobs submitted from Macintosh workstations connected to an Ethernet using AppleTalk protocol. The basic configuration is for the print server in an AppleTalk environment is performed simply by opening the Chooser window and selecting a printer that is connected to the print server.

  • Page 44: Setting Up A Macintosh Computer

    Zone Name: In this option, type an AppleTalk Zone name that you want the print server to belong to or leave it in default (This enables the print server automatically search and link itself to the default zone that is set on the AppleTalk router, if found).
  • Page 45 6. Close the Chooser Windows. 7. Done. SNMP Setup TCP/IP networks use a standard management protocol called Simple Network Management Protocol (SNMP). SNMP is widely used in the industry as a solution for remote network management and monitoring of networking devices. SNMP actually includes a protocol, a database structure specification, and a set of database objects.
  • Page 46 system.sysName Indicates the print server's name for identification. system.sysLocation Indicates the location of the print server. snmp.snmpEnableAuthenTraps Enables disables function sending SNMP Authentication Failure trap message network administrator, if the community name within a SNMP request is not correct. Users can set up print server’s SNMP functions by using their browsers. 1.
  • Page 47 SNMP Traps: Enable the function of sending SNMP Authentication Failure trap message to the network administrator, if the community name within a SNMP request is not correct. SMB Setup The print server supports the SMB (Server Message Block) protocol, user can send the print jobs through Network Neighborhood without installing print server’s driver.

  • Page 48: Network Print Monitor

    6. Network Print Monitor Preparation The print server supports TCP/IP, IPX/SPX and NetBEUI protocols under Windows system. Please make sure that the following steps have been completed before proceeding with installation under Microsoft Windows 95/98/ME/NT4/2000/XP 32bit edition or server 2003 32bit edition..

  • Page 49: Tcp/Ip Protocol Installation

    TCP/IP Protocol Installation 1. Click Start, point to Settings and select Control Panel. 2. Double click the Network icon. 3. If the TCP/IP Protocol is not already installed, click Add. 4. Select Protocol and click Add. 5. Select Microsoft from the Manufacturers list. 6.

  • Page 50: Netbeui Protocol Installation

    NetBEUI Protocol Installation 1. Click Start, point to Settings, and select Control Panel. 2. Double click the Network icon. 3. If the NetBEUI is not already installed, click Add. 4. Select Protocol and click Add. 5. Select Microsoft from the Manufacturers list. 6.
  • Page 51 10. A message reading, “After your printer is installed, Windows can print a test page so you can confirm that the printer is set up properly.” Select No and click Finish. 11. Double-click the newly created Printer Name icon. 12. Select Printer and Properties. 13.

  • Page 52: Uninstalling Network Print Port On Windows 95/98/Me/Nt/2000/Xp/2003

     By default, the computer will first search for the print server(s) on the network by using the IPX/SPX protocol.  If the IPX/SPX protocol is installed, the print server will be displayed along with its Node ID, as shown in Node column. (The last 6 digits of the Node ID, located on the back of the print server unit).

  • Page 53: Tcp/Ip Lpr Port Printing Installation

    7. TCP/IP LPR Port Printing Installation Basic TCP/IP Installation Overview When installing your print server in a TCP/IP environment, IP addresses are essential as a basic means of communications. It is therefore necessary to first assign an IP address to your print server unit.
  • Page 54 5. From the Printer Ports box as shown in the following picture, select the LPR Port. 6. The Add LPR compatible printers box will then appear as shown in the following picture. Type in the IP address assigned to the print server in the Name or address of server providing lpd box.

  • Page 55: Windows 2000/Xp/2003/Vista Standard Tcp/Ip Port Printing Installation

    Windows 2000/XP/2003/Vista Standard TCP/IP Port Printing Installation lick Start, point to Settings, and select Printer. 2. Run Add Printer, Click Next. 3. The Add Printer Wizard screen will appear, Select Local Printer and click Next. 4. From the type of Create a new port box as shown in the following picture, select the Standard TCP/IP Port, Click Next and Next.
  • Page 56 6. In the Add Standard TCP/IP Printer Port Wizard box as shown in the following picture, Select Custom, Click Settings button, and click Next. 7. In the Configure Standard TCP/IP Port Monitor box as shown in the following picture, select LPR form Protocol, type in a queue name, e.g. lp1 for port-1, lp2 for port-2 and lp3 for port-3 of print server.
  • Page 57 10. Select the appropriate printer manufacturer and printer type list and click Next. 11. Type in a new Printer name or leave it in default, and click Next button. 12. A message reading, “To confirm that the printer is installed properly, you can print a test page”.

  • Page 58: Unix Installation

    UNIX Installation After the static IP address is assigned, the Print Server is ready to be configured. For some UNIX/Linux systems, we include the detailed installation procedures below. If you can’t find the installation procedure corresponding to your UNIX system, please refer to your UNIX manuals for details about configuring your UNIX for the “remote printing system”.
  • Page 59 Redhat Linux 9(Fedora) The Print Server can work under any Linux-based systems, including Slackware, RedHat, etc, without any problems. Basically, the Linux's printing system is based on BSD system. Although many commercial Linux systems are available in the market and their commands will vary slightly, depending upon which version is used, the functionality of the Linux-based variants is exactly the same.
  • Page 60 7. Click Forward button. 8. In the Name field, type a user-defined name, click Forward.
  • Page 61 9. In the Queue Type field, choose Networked UNIX. 10. In the Server field, type the IP address of print server 11. In the Queue field, type a print server’s port name, which connect to the printer. For example: lp1. 12.
  • Page 62 15. Done.

  • Page 63: Upgrading Print Server

    8. Upgrading Print Server Overview Upgrading print server will allow you to upgrade its firmware inside the print server while the newer software version of the print server is available from your local dealer. Depending on the different systems users might use, this chapter is divided into several Sections; please refer to the following lists for your systems.

  • Page 64: Upgrading The Print Server From Unix (Through Tcp/Ip)

    3. Wait for the transfer successful message. 4. Done. Upgrading the print server from UNIX (Through TCP/IP) 1. Log in as root 2. Ensure binary file is located in your current working directory. 3. Type “tftp <print server’s IP address>”. 4.
  • Page 65 5. Click Upgrade. 6. Done.

  • Page 66: Troubleshooting

    9. Troubleshooting General Troubleshooting Overview The most common problems, which cause the print server to perform improperly, are covered in this chapter. If a problem still exists after reading this chapter, please contact your dealer for technical support. LED Light Indicators The print server is equipped with LED lights to assist in diagnosing problems that are the result of the network and/or the print server hardware itself.

  • Page 67: Print Port Related Problems

    Print Port Related Problems Printing data failure may be caused by a loose connection of the print server to the parallel port of the printer. Check to see if any of the pins on the parallel port connector are damaged. In addition, check the cable connection.

  • Page 68: Moving The Print Server Toa New Segment

    11. Repeat the Steps 8-12 for the other Ethernet adapter. 12. Restart the computer. 13. Done. Moving the print server to A New Segment If the print server is moved from one network segment to another after the initial installation, through the Network Print Port, the print server must be reconfigured on the original Windows NT server or on each Windows 95/98 computer using this print server in order for the print server’s driver on each computer to re-establish a new connection.

  • Page 69: Moving Your Computer Toa New Segment

    9. Done! Moving Your Computer to A New Segment If you are using the print server through the Network Print Port on your NT or Windows 95/98/Me computer and your computer is going to be moved onto another segment, you have to reconfigure the print server on your computer to use your print server.
  • Page 70 B. The print server's IP address is duplicated or is as same as another computer's IP address on the network. If this is the case, please consult your network administrator to obtain an unused IP address for your print server. C.
  • Page 71 6. In your editor, modify "BoxIPAddress" field from "0.0.0.0" to "192.72.214.100". Leave other options as default and do not change their values. When done, save this new file and quit from your editor. Please note, in this step you must specify an IP address which is valid on Segment B, such as 192.72.214.100 in this example, rather than 192.72.214.68.

  • Page 72: Appendix

    Appendix: SMB Printing with Windows XP 1. Enable the SMB settings from the print server’s WEB configuration. Assume your computers use the “WORKGROUP” as the SMB workgroup name in Windows. Please assign the same SMB name to your print server. If print server uses the different SMB name from computers’, the SMB printing won’t active.
  • Page 73 3. Double click it again. 4. Now you have to install the printer’s driver.
  • Page 74 5. Choose it from the “Add Printer Wizard”. 6. Install printer successfully.
  • Page 75 7. Now, you can find your printer’s icon and you can use the SMB printing mode.
  • Page 76 Reset Button Reboot the Print server: 1. Verify the power of print server is turned on. 2. Press the reset button once, and then release it. WARNING: This will restart the print server and stop all on-going and pending print jobs! Perform a Factory Default: 1.

  • Page 77: Frequently Asked Questions

    Frequently Asked Questions Question A Print jobs are sent to the print queue successfully, but fail to be sent to the printer. Possible explanations 1. The Print server Name/Print Queue configuration in PCONSOLE is incorrect. 2. The Print server name specified and stored in the print server memory doesn’t match the same one set in PCONSOLE.
  • Page 78 Question D The Status LED light keeps blinking after POST. Possible explanation and solution The last upgrade process was not completed. The print server must be upgraded again by using the PSAdmin. Please see Chapter 3 for details. Question E The PSAdmin reports “Create Print server Error”, “Create Printer Error”, or “Create Print Queue Error”...

  • Page 79: Additional Installation Instructions

    Additional Installation Instructions Panasonic KX-P6100/6300/6500 If you are using a Panasonic KX-P6100/6300/6500 laser printer with the print server through the Network Print Port under Windows 95/98, please redirect the printer named “Panasonic KX-P6100 PCL” or “Panasonic KX-P6300 PCL”, or “Panasonic KX-P6500 PCL”...

Table of Contents