Panasonic Varicam AU-VCVF20G Operating Instructions Manual page 17

Item
[SCAN]
[PIC. SIZE]
[WFM]
[- TRANSPARENCE]
r [USER SW 1] (when combined with anything other than the memory card camera-recorder
AU-V35LT1G)
The following function is assigned to the <EVF USER 1> button.
f [EXPAND1]: Switches enable/disable of the enlargement display function.
The setting for enlargement rate is changed by pressing the jog dial.
The setting for position is changed by turning the jog dial.
r [USER SW 2] (when combined with anything other than the memory card camera-recorder
AU-V35LT1G)
The following function is assigned to the <EVF USER 2> button.
f [WFM]: Switches display/hide of the waveform monitor.
r [INFORMATION]
Item
[OPERATION TIME]
[VERSION]
@ NOTE
t For the function that can be selected when connected to the memory card camera-recorder
AU-V35LT1G, visit the Panasonic website (https://pro-av.panasonic.net/manual/en/index.html) and refer
to the Operating Guide for VariCam LT (HTML version).
Reverses the display.
[NORMAL]/[REVERSE]
f Factory setting: [NORMAL]
Adjusts the image size displayed in the viewfinder.
[0] - [3]
f Factory setting: [0]
(Displays when combined with anything other than the memory card
camera-recorder AU-V35LT1G)
Sets the display format of the waveform monitor.
[Y], [G], [B], [R], [PARADE]
f Factory setting: [Y]
(Displays when combined with anything other than the memory card
camera-recorder AU-V35LT1G)
Sets the transparency of the waveform monitor display.
[25%], [50%]
f Factory setting: [25%]
Displays the total display time of the organic EL panel of the viewfinder.
Displays the firmware version of the viewfinder.
Viewfinder status display
Description of settings
Description of settings
17