Apm Configuration - Asus ROG STRIX Z490-F Bios Manual

U32G2_C4 Type C Power Mode
[AUTO] Power will be provided to USB 3.2 Gen 2 Type-C ports automatically when
a device is detected.
[Enabled] Power will always be on for USB 3.2 Gen 2 Type-C ports.
Improper connections may damage the system permanently.
Serial Port Configuration
Set parameters of Serial Port.
This item only functions when a serial port (COM) connector is on the motherboard.
Serial Port
Allows you to enable or disable Serial Port.
Configuration options: [On] [Off]
The following item appears only when set Serial Port is set to [On].
Change Settings
Allows you to choose the setting for Super IO device.
Configuration options: [Auto] [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4]
[IO=2E8h; IRQ=3]
6.13

APM Configuration

Restore AC Power Loss
This item allows your system to go to ON state, OFF state, or both states after an AC power
loss. When setting your system to [Last State], it goes to the previous state before the AC
power loss.
Configuration options: [Power Off] [Power On] [Last State]
CEC Ready
Enabling this item allows your system to comply with CEC (California Energy Commission)
regulations and save more power under S0 state.
Configuration options: [Disabled] [Enabled]
ROG STRIX Z490-F BIOS Manual 55