Asus Ez Flash 3 Utility; Asus Secure Erase - Asus ROG STRIX Z490-F Bios Manual

Hide thumbs Also See for ROG STRIX Z490-F:
Table of Contents

Advertisement

9.1

ASUS EZ Flash 3 Utility

This item allows you to run ASUS EZ Flash 3. When you press <Enter>, a confirmation
message appears. Use the left/right arrow key to select between [Yes] or [No], then press
<Enter> to confirm your choice.
For more details, refer to section ASUS EZ Flash 3.
9.2

ASUS Secure Erase

SSD speeds may lower over time as with any storage medium due to data processing.
Secure Erase completely and safely cleans your SSD, restoring it to factory performance
levels.
To launch Secure Erase, click Tool > ASUS Secure Erase on the Advanced mode menu.
Displays the
available SSDs
Status definition:
70
The time to erase the contents of your SSD may take a while depending on its size.
Do not turn off the system during the process.
Secure Erase is only supported on Intel SATA port. For more information about Intel
SATA ports, refer to section Motherboard layout in your user manual.
Frozen. The frozen state is the result of a BIOS protective measure. The BIOS
guards drives that do not have password protection by freezing them prior to booting.
If the drive is frozen, a power off or hard reset of your PC must be performed to
proceed with the Secure Erase.
Locked. SSDs might be locked if the Secure Erase process is either incomplete
or was stopped. This may be due to a third party software that uses a different
password defined by ASUS. You have to unlock the SSD in the software before
proceeding with Secure Erase.
ROG STRIX Z490-F BIOS Manual

Advertisement

Table of Contents
loading

Table of Contents