Table of Contents
Advertisement
6
Never disassemble, repair or modify the power cord
•
or AC adapter.
- This may cause a fire or electric shock.
Make sure to connect the power cable to the
•
grounded current.
- You may be electrocuted or injured.
•
Use the rated voltage only.
- The product can be damaged, or you may be
electrocuted.
In the presence of thunder and lightning, never touch
•
the power cord and signal cable because it can be
very dangerous.
- It can cause electric shock.
Do not connect several extension cords, electrical
•
appliances, or electrical heaters to a single outlet. Use
a power strip with a grounding terminal designed for
exclusive use with the computer.
- A fire can break out due to overheating.
•
Do not touch the power plug with wet hands.
Additionally, if the cord pin is wet or covered with
dust, dry the power plug completely or wipe dust off.
- You may be electrocuted due to excess moisture.
•
If you don't intend to use the product for a long time,
unplug the power cable from the product.
- Covering dust can cause a fire, or insulation
deterioration can cause electric leakage, electric
shock or fire.
Fix the power cable completely.
•
- If the power cable is not fixed completely, a fire can
break out.
•
Do not insert a conductor (like a metal chopstick)
into one end of the power cable while the other
end is connected to the input terminal on the wall.
Additionally, do not touch the power cable right after
plugging into the wall input terminal.
- You may be electrocuted.
The appliance coupler is used as the disconnect
•
device.
Please make sure the device is installed near the wall
•
outlet to which it is connected and that the outlet is
easily accessible.
•
As long as this unit is connected to the AC wall outlet,
it is not disconnected from the AC power source even
if the unit is turned off.
•
When product was moving, be careful do not scratch
the floor.
CAUTION
Be sure to keep the outlet, AC adapter, and pins of
•
the power plug clean from dust and etc.
- This may cause a fire.
Do not unplug the power cord while the product is
•
in use.
- Electrical shock can damage the product.
•
Use only the power cord supplied with the unit. If
you use another power cord, make sure that it is
certified by the applicable national standards when
not provided by the supplier. If the power cable is
faulty in any way, please contact the manufacturer or
the nearest authorized repair service provider for a
replacement.
Precautions In Moving the
Product
WARNING
Make sure to turn off the product.
•
- You may be electrocuted or the product can be
damaged.
Make sure to remove all cables before moving the
•
product.
- You may be electrocuted or the product can be
damaged.
Make sure the panel faces forward and hold it with
•
both hands to move. If you drop the product, the
damaged product can cause electric shock or fire.
Contact an authorized the service center for repair.
Make sure the product is turned off, unplugged, and
•
all cables have been removed. It may take 2 or more
people to carry larger apparatus. Do not press against
or put stress on the front panel of the apparatus.
CAUTION
•
Do not shock the product when moving it.
- You may be electrocuted or the product can be
damaged.
Do not dispose the product-packing box. Use it when
•
you move.
Advertisement
Table of Contents
