Table of Contents
Advertisement
Installation
1
Select a good location. Place your fridge where it is
easy to use.
2
Avoid placing the unit near heat sources, direct
sunlight or moisture.
3
To ensure proper air circulation around the fridge,
please maintain sufficient space on both the sides
as well as top and maintain at least 100 mm from
the rear wall.
4
This Products are slightly tilted to the back when
installed. This is normal. (This product has been
designed to be intentionally tilted backwards, taking
into account the weight of the front door.)
- Use the rubber pad at the foot of the product to
prevent shaking of the product.
5
Clean your fridge thoroughly and wipe off all dust
accumulated during shipping.
6
Install accessories such as shelf, etc., in their
proper places. They are packed together to prevent
possible damage during shipment.
7
Connect the power supply cord (or plug) to the
outlet. Don't double up with other appliances on the
same outlet.
Starting
When your fridge is installed, allow it 2-3 hours to
stabilize at normal operating temperature prior to filling
it with fresh foods.
If power plug is disconnected, allow 5 minutes delay
before restarting. Your fridge is now ready for use.
Storing Food
CAUTION
Do not store food which goes bad easily at low
•
temperature, such as banana, and melon.
Allow hot food to cool prior to storing. Placing hot
•
food in the fridge could spoil other food, and lead to
higher electric bills.
•
When storing the food, use a container with a lid. This
prevents moisture from evaporating, and helps food
to keep its taste and nutrients.
•
Do not block air vents with food. Smooth circulation
of cold air keeps fridge temperature even.
Do not open the door frequently. Opening the door
•
lets warm air enter the fridge, and cause temperature
to rise.
Do not store pharmaceutical products, scientific
•
materials or other temperature sensitive products
in the refrigerator. Products that require strict
temperature controls must not be stored in the
refrigerator.
•
Do not fill anything above the red line (PLEASE DO
NOT FILL ABOVE THIS LINE) in the fridge. If object
is above the red line, cooling performance will be
reduced.
Suggestion for energy saving
Please do not keep the door open for a long time,
•
close door in the shortest time.
Too much food are not advised to be put in. Enough
•
space should be kept for cool air circulating freely.
Allow hot food to cool prior to storing. Placing hot
•
food in the fridge could spoil other food, and lead to
higher electric bills.
•
Do not block air vents with food. Smooth circulation
of cold air keeps fridge temperature even.
Do not open the door frequently. Opening the door
•
lets warm air enter the fridge, and cause temperature
to rise.
To Keep a position of inner parts like as baskets,
•
drawers (Fridge), shelves and wire shelves Supplied by
manufacturer is the Most Efficient usage for energy
saving.
13
Advertisement
Table of Contents
