Gigabyte GA-M61VME-S2 User Manual page 21

6) FDD (FDD Connector)
The FDD connector is used to connect the FDD cable while the other end of the cable connects to the
FDD drive. The types of FDD drives supported are: 360 KB, 720 KB, 1.2 MB, 1.44 MB and
2.88 MB. Before attaching the FDD cable, please take note of the foolproof groove in the FDD
connector.
7) SATAII 0 / SATAII 1 (SATA 3Gb/s Connectors)
SATA 3Gb/s can provide up to 300 MB/s transfer rate. Please refer to the BIOS setting for the
SATA 3Gb/s and install the proper driver in order to work properly.
33
34
Pin No.
7 1
SATAII 0
SATAII 1
1 7
- 21 -
1
2
Definition
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND
Hardware Installation