Gigabyte GA-EP45T-UD3 User Manual page 101

B. Installing Windows Vista
(The procedure below assumes that only one RAID array exists in your system.)
Intel ICH10R SATA controllers: 
Step 1:
Restart your system to boot from the Windows Vista setup disk and perform standard OS installation
steps. When a screen similar to that below appears, select Load Driver. (Figure 8).
Figure 8
Step 2:
Specify the location where the driver is saved, such as your floppy disk or USB flash drive (Figure 9).
Figure 9
 Only for GA-EP45T-UD3R.
- 101 - Appendix