Gigabyte GA-EP45T-UD3 User Manual page 100

Step 4:
After the SATA RAID/AHCI driver installation is completed, you can proceed with the W indows XP
installation.
WindowsXP Professional Setup
Welcome to Setup.
This port of the Setup program prepares Microsoft(R)
Windows (R) XP to run on your computer.
Enter= Continue
GA-EP45T-UD3R/UD3 Motherboard
To set up Windows XP now, press ENTER.
To repair a Windows XP installation using
Recovery Console, press R.
To quit Setup without installing Windows XP, press F3.
R=Repair F3=Exit
Figure 7
- 100 -