NEC PX602WL User Manual page 60

• NETWORK SERVICE
PJLink PASSWORD
HTTP PASSWORD
AMX BEACON
NOTE: If you forget your password, contact your dealer.
*What is PJLink?
PJLink is a standardization of protocol used for controlling projectors of different manufacturers. This standard
protocol is established by Japan Business Machine and Information System Industries Association (JBMIA) in 2005.
The projector supports all the commands of PJLink Class 1.
Setting of PJLink will not be affected even when [RESET] is done from the menu.
CRESTRON
• ROOMVIEW for managing from the computer.
DISABLE
ENABLE
• CRESTRON CONTROL for managing from the controller.
DISABLE
ENABLE
IP ADDRESS
IP ID
• INFORMATION
WIRED LAN
UPDATE
TIP: The CRESTRON settings are required only for use with CRESTRON ROOMVIEW.
For more information, visit
Set a password for PJLink*. A password must be 32 characters or less. Do not forget
your password. However, if you forget your password, consult with your dealer.
Set a password for HTTP server. A password must be 10 characters or less.
When a password is set up, you will be prompted for your user name (arbitrary) and
password during LOGON.
Turn on or off for detection from AMX Device Discovery when connecting to the network
supported by AMX's NetLinx control system.
TIP:
When using a device that supports AMX Device Discovery, all AMX NetLinx control system will
recognize the device and download the appropriate Device Discovery Module from an AMX server.
Placing a checkmark will enable detecting the projector from AMX Device Discovery.
Clearing a checkmark will disable detecting the projector from AMX Device Discovery.
Disables ROOMVIEW.
Enables ROOMVIEW.
Disables CRESTRON CONTROL.
Enables CRESTRON CONTROL.
Set your IP address of CRESTRON SERVER.
Set your IP ID of CRESTRON SERVER.
Display a list of settings of wired LAN connection.
Reflect settings when they are changed.
http://www.crestron.com
47
3. Convenient Features